678443

Roland test100 Manual

5
Zoom out
Zoom in
Previous page
1/14
Next page
General information 3
WARNING
Please concentrate fully at all times on your driving! As the driver you are fully
responsible for road safety. Only use the functions of the radio in such a way
that you are always in full control of your vehicle in all traffic situations!
Using the display
Carefully handle the display because dents and scratches can occur through pressure
of the finger or contact with sharp objects.
The display can be cleaned with a soft cloth and finger marks can be wiped away with
pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display
surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience coding. If the radio is being operated for the
first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the battery, first of all switch on the ignition and
then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered. In
this case, please do not hesitate to contact an authorised Škoda Service Partner or a
Škoda importer.
As the unit only functions after entering the safety code, this practically excludes its use
after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not necessary.
Enter code
– Switch on the radio if the ignition is on.
– Enter the safety code using the station keys - .
– Confirm the safety code by pressing the station key .
If you have confirmed a wrongly entered code, you can repeat once again the entire
process.
If the code number is entered incorrectly for the second time, the unit will be blocked
for approx. one hour. It is possible to enter again the safety code after one hour has
expired, when the unit and the ignition have been switched on.
The cycle - two attempts, blocked for an hour - will continue to apply.
Basic setting
Switching the unit on and off
– The system is switched on or off by briefly pressing the control button .
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically. You can switch on the unit again by pressing the control
button . If the ignition is switched off, the unit (discharge protection of the vehicle
battery) switches off automatically after approx. one hour.
If you have switched off the radio by withdrawing the ignition key, the radio switches
on again once the ignition is on.
Tone settings
– Press the button and then the station key and select the desired parameter.
1
4
6
A
1
A
1
A
12
s214.14.book Page 3 Thursday, January 28, 2010 1:29 PM
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

roland-test100

Reset search

  • Is this manual available in English . Really need it Submitted on 13-5-2020 at 13:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland test100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland test100 in the language / languages: Dutch as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info