652876
13
Zoom out
Zoom in
Previous page
1/18
Next page
13
Deutsch
Français Italiano Español
Português
Nederlands
EnglishEnglish
Calibrating the Hi-HatOptimizing the Pads
Changing the Type of Pad
You can select the type of pad you’re using (Pad Type) so the TD-25 will accurately receive the signal from
the pad.
1. In the SETUP screen (p. 12), select Trigger Settings.
The TRIGGER SETTINGS screen appears.
2. Strike a pad to select the pad for which to
make settings.
3. Use the [INSTRUMENT] knob to set the pad
type.
Species the model name of pad that’s connected.
Adjusting the Sensitivity of the Pad
1. In the SETUP screen (p. 12), select Trigger Settings.
The TRIGGER SETTINGS screen appears.
2. Use the [F2] (=) [F3] (?) buttons to select “Sensitivity.
3. Use the [INSTRUMENT] knob to adjust the sensitivity.
Higher sensitivity allows the pad to produce a loud volume even
when played softly. Lower sensitivity will keep the pad producing a low volume even when played
forcefully.
Selected pad
Pad type
If you’re using the VH-11 hi-hat, you must rst adjust the calibration.
* Set the HI-HAT type to VH-11” as described in “Changing the Type of Pad” (p. 13).
1. Move the hi-hat cymbal away from the
motion sensor.
2. Turn the power of the TD-25 on.
3. Loosen the clutch screw, and allow the hi-hat
to rest naturally on top of the motion sensor
unit.
4. In the SETUP screen (p. 12), select “Hi-Hat
Settings.
5. While you watch the meter that’s displayed in
the screen, turn the VH-11’s oset adjustment
screw to adjust it.
Adjust the screw so that the AC appears in the meter.
Motion sensor unit
Clutch
Hi-hat cymbal
Oset
adjustment screw
While you watch the meter, turn the oset
adjustment screw.
NG OK
VH Oset adjustment points
If the closed hi-hat sound is dicult to attain, rotate the oset adjustment screw towards “CLOSE.
If the open hi-hat sound is dicult to attain, rotate the screw towards “OPEN.
If the sound cuts o when you strike the hi-hat forcefully, rotate the oset adjustment screw towards
“OPEN.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland TD-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland TD-25 in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland TD-25

Roland TD-25 User Manual - German - 18 pages

Roland TD-25 User Manual - Dutch - 18 pages

Roland TD-25 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info