527444
127
Zoom out
Zoom in
Previous page
1/140
Next page
Troubleshooting
(continued)
127
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
Problems with the Sound
(continued)
Problem
Cause and Action
See
Page
The sound recorded via
the internal mics is not
loud enough
Have you adjusted the input level of the internal mics?
Turn the [MIC] knob to raise the input level of the internal mics.
42
The recorded sound is
noisy or distorted
Is the input level adjusted appropriately?
Noise can tend to be become more noticeable if the sound being input
is at a relatively low level. On the other hand, distortion can crop up
when the level is high. Try to always keep the input level adjusted to a
setting that’s appropriately matched to the volume of the sound you’re
inputting.
If you raise the input level when you’re using the external microphones
with limited sensitivity, any noise from the internal CD drive could
become more noticeable and might be recorded along with your
recording. If you feel dissatisfied with the outcome, try using the
following procedure when recording.
Use batteries to power the unit. (24)
Record to SD memory card. (45, 50, 52)
Use the AC adaptor to power the unit. (22)
Write the song data on the SD memory card to a CD. (95)
Adjust the input level so that the PEAK indicator lights briefly when loud
sounds are input.
42, 46,
50, 52
Could the input level be raised for a jack to which no device is
connected?
Even if no device is connected, we recommend that you turn down the
input level—turn the knob all the way to the left—for everything other
than the audio source you’re recording.
Could MIC SELECT be set to “Internal
?
Even though you thought you were recording using the external mics,
a noisy recording may indicate that you were actually recording through
the internal mics. If you want to record using the external mics, set to
the “External,” “Ext(MONO),” or “Plug-In Power.”
45
Is the output level set correctly?
If you raise the output level too high, noise or distortion may occur in
the sound from the internal speakers. Turn the [OUTPUT LEVEL] knob to
adjust the volume.
70
Unintended tone quality
Could you have made bass or treble settings?
Set the bass and treble settings to “0.”
72
An unwanted effect is
applied to the sound
Could you have selected a reverb?
Turn the reverb “Off.”
73
Volume changes are not
recorded correctly
according to the actual
performance
Could the [MIC LEVEL] switch be set to the “AUTO” position?
The “AUTO” position is suitable for recording human voices at a
meeting or lecture, and may be unsuitable for recording an instrumental
performance. Change the setting to “MANUAL,” and turn the [MIC]
knob to adjust the input level.
44
CD-2u_SD-2u_e.book 127 ページ 2013年1月24日 木曜日 午前11時34分
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland SD-2U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland SD-2U in the language / languages: English as an attachment in your email.

The manual is 11,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland SD-2U

Roland SD-2U User Manual - German - 140 pages

Roland SD-2U User Manual - Dutch - 142 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info