538463
36
Zoom out
Zoom in
Previous page
1/60
Next page
36
Troubleshooting
If you experience problems, read this chapter rst. It contains tips for solving most problems. If this
chapter cannot help you solve a problem, please refer to the support section of our website. If the
problem is not resolved, refer to the contact information listed at the end of this document.
Roland support website: http://www.roland.com/
Problems When Installing the Driver
Problem Conrmation Resolution
Installer does not
start
Are you attempting to install from a
networked DVD-ROM drive?
You cannot install from a networked DVD-ROM
drive.
Cannot install
Are you logged on with a user account
that does not have administrator
privileges?
Log on to the computer with a user account that
has administrator privileges.
For details, consult the administrator for your
computer system.
Is the “Driver Signing Options” setting set
to [Block]? (Windows XP)
Change the “Driver Signing Options” setting (p. 44).
Are other programs or resident programs
(such as antivirus programs) running?
Be sure to exit all other programs before
installation.
Warning or error
appears during
installation
(Windows)
In the “Device Manager, do you see
“Other device, “Unknown device, or a
device for which “?, “!, or “x” is displayed?
Reinstall the QUAD-CAPTURE driver (p. 49).
Installer does not
exit
Is your computer running on battery
power?
Connect the power cord to the computer.
Other than a mouse and keyboard, are
any USB devices connected?
Make sure that there are no USB devices connected
to the computer (other than a mouse and
keyboard) during installation.
Is the QUAD-CAPTURE connected to
a USB hub that is not connected to a
power supply?
Use a USB hub that connects to a power supply.
“Found New
Hardware Wizard”
appears again
after driver
was installed
(Windows XP)
Did you connect the QUAD-CAPTURE to
a dierent USB connector than the one
you used when installing the driver?
If you change the USB connector to which the
QUAD-CAPTURE is connected, the “Found New
Hardware Wizard” may appear again even if the
driver has already been installed on the computer.
Follow step 9 of the driver installation procedure (p.
17) and install the driver.
Numeral such as
“2-” appears at
the beginning of
a device name
(Windows)
Did you connect the QUAD-CAPTURE to
a dierent USB connector than the one
you used when installing the driver?
If you connect the QUAD-CAPTURE to a dierent
USB connector than the one you used when
installing the driver, a numeral may appear with the
device name.
To have the device name appear without the
numeral, connect the QUAD-CAPTURE to the same
USB connector used during installation, or reinstall
the driver (p. 49).
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland QUAD CAPTURE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland QUAD CAPTURE in the language / languages: English as an attachment in your email.

The manual is 8,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland QUAD CAPTURE

Roland QUAD CAPTURE User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info