Manual Roland Micro Cube Bass RX (page 5 of 52) (English, German, Dutch, French, Italian, Portuguese, Spanish)

537789

Zoom out

Zoom in

1/52

Español Italiano Français Deutsch EnglishPortuguêsNederlands

Power Supply

Remove the lid of the battery

compartment and insert 6 AA

batteries, making sure that they

are correctly oriented.

* To avoid malfunction and/or

damage to speakers or other

devices, always turn off

the power on this unit and

disconnect any other devices when installing or replacing batteries.

* When closing the lid of the battery compartment, first insert

the catches on the lid into the matching cavities, then push

the lid down firmly until you hear a click.

Using Batteries

Please note the following points.

• If there are batteries in the unit while an AC adaptor is being used,

normal operation will continue should the supply of current

be interrupted (power outage or power cord disconnection).

•

Use only alkaline batteries (LR6). You cannot use any other type of battery.

• Battery Life

Used continuously at maximum power: approx. 11 hours

(These figures will vary depending on the actual conditions of use)

•

When operating on battery power only, the unit's power indicator (p.6)

will become dim when battery power gets too low. Replace the batteries

as soon as possible.

• Sounds may distort easily or may cut off when played at high

volume as the battery power begins to fade, but this is normal

and does not indicate a malfunction. Either replace the batteries

or use the AC adaptor included with the unit.

1. Insert the DC plug of the supplied AC adaptor into the unit's AC

adaptor jack.

By anchoring the AC adaptor cord using the

cord hook, as shown in the illustration, you

can prevent situations such as the adaptor

becoming unplugged or unreasonable

pressure being exerted on the AC adaptor

jack.

* To avoid faulty operation or damage to the

speakers, you should disconnect the unit from other devices and

switch off its power when connecting the AC adaptor.

2. Connect the supplied power cord to the AC adaptor, and plug

it into an AC outlet.

Place the AC adaptor so the side with the indicator (see illustration)

faces upwards.

* The indicator will light when you plug the AC adaptor into an AC outlet.

Using the Unit With the AC Adaptor

Please note the following points.

•

Although the unit can operate on batteries alone, connecting the AC

adaptor to the unit while it has batteries inserted ensures that power

is supplied from the AC adaptor, reducing battery consumption.

•

Use only the AC adaptor included with the MICRO CUBE BASS RX.

Use of other AC adaptors may damage the amp or result in other problems.

Once the connections have been completed, turn on power to your various

devices in the order specified. By turning on devices in the wrong order, you

risk causing malfunction and/or damage to speakers and other devices.

1. Make sure that all volume controls on the MICRO CUBE BASS RX

and connected devices are set to 0.

2. Turn on all the devices connected to the MICRO CUBE BASS RX's

INPUT jack and AUX IN jack.

3. Turn on the MICRO CUBE BASS RX.

4. Adjust the volume levels for the devices.

5. Before switching off the power, lower the volume on each of the

devices in your system, and then turn off the devices in the reverse

of the order followed when switching them on.

NOTE

Due to a circuitry protection feature, this unit requires a few moments

after power up before it is ready for normal operation. To avoid

sudden, high-volume sound, always make sure to have the volume

level turned down before switching on power.

NOTE

Even with the volume all the way down, you may still hear some

sound when the power is switched on and off, but this is normal,

and does not indicate a malfunction.

Attach the supplied strap to

the strap pin as shown in the

illustration.

NOTE

Attach the strap securely so that it does not easily become

detached. If the strap is loose, and you use it that way when

carrying the MICRO CUBE BASS RX, the amp could be dropped,

possibly resulting in damage or injury.

NOTE

Use only the provided strap. The included strap is meant for

exclusive use with the MICRO CUBE BASS RX. Do not use this strap

for other products.

NOTE

Do not spin or swing the MICRO CUBE BASS RX while holding it by

the strap. This is extremely dangerous, as it may cause the strap to

become detached; or, if the motion is repeated enough, may even

break the strap.

Inserting Batteries

Connecting the AC Adaptor

Indicator

AC Outlet

AC Adaptor

Power Cord

Switching the Power On

and Off

Attaching the Strap

MCB-RX_r_e.book Page 5 Thursday, January 10, 2008 1:00 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland Micro Cube Bass RX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland Micro Cube Bass RX Manual

Product: