755953

Roland LX708 Manual

13
Zoom out
Zoom in
Previous page
1/38
Next page
13
°Recording Your Performance
Recording Your Keyboard Performance
You can record your own keyboard performance, and then play back
to check it.
Getting Ready to Record
1. Select the tone that you want to play.
2. You can sound the metronome if you like.
Set the metronome’s tempo and time signature. The metronome
setting is stored in the song, and you can use the same settings
during playback.
3. Press the [t] button.
The [t] button lights, the [s] button blinks, and the piano
enters record-standby mode.
If you decide to cancel recording, press the [t] button once again.
Starting/Stopping Recording
4. Press the [s] button.
After a one-measure count, recording starts, and the [7]
button and [s] button are both lit. The performance is saved
automatically.
MEMO
You can also start recording by playing the keyboard instead of
pressing the [s] button. In this case, a count is not sounded.
5. To stop recording, press the [s] button once
again.
Recording stops.
Listening to the Recorded Performance
6. Press the [s] button.
After you record, the newly recorded song is selected.
The recorded song starts playing back.
Deleting a Saved Song
You can delete a song that you saved.
MEMO
5You can also delete a recorded song by holding down the [7]
button and pressing the [ ] button.
5If you want to delete all songs that have been saved to internal
memory, initialize the memory (“Initializing the Memory
(Format Media)” (p. 23)).
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access the “Delete Song”
screen.
3. Press the [ ] knob to conrm.
The Delete Song screen appears.
4. Turn the [ ] knob to select the media that contains
the song you want to delete, and press the [ ] knob
to conrm.
5. Turn the [ ] knob to select the song that you want
to delete, and press the [ ] knob to conrm.
A conrmation message appears.
If you decide to cancel, press the [ ] button.
6. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The deletion is executed.
Managing songs you recorded
Operation
Renaming
a recorded
song
You can rename a saved song.
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access the “Rename Song” screen,
and press the [ ] knob to conrm.
3. Turn the [ ] knob to select the media that contains the
song you want to rename, and press the [ ] knob to
conrm.
4. Turn the [ ] knob to select the song that you want to
rename, and press the [ ] knob to conrm.
5. Rename the song.
Select the character which
you want to change Turn the [ ] knob
Change the character
Press the [ ] knob (conrm)
/
Turn the [ ] knob (change the character)
/
Press the [ ] knob (back)
Insert one character Press the [s] button
Delete one character Press the [7] button
6. Turn the [ ] knob to select the ( at the right edge of
the screen, and then press the [ ] knob to conrm.
A conrmation message appears.
7. Turn the [ ] knob to select “Yes,” and press the [ ] knob
to conrm.
The song is renamed.
* Never turn o the power or disconnect the USB ash drive
while the screen indicates “Executing...”
8. Press the [ ] button.
You exit function mode.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland LX708 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland LX708 in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland LX708

Roland LX708 User Manual - German - 38 pages

Roland LX708 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info