755955

Roland LX705 Manual

15
Zoom out
Zoom in
Previous page
1/38
Next page
15
Recording Your Performance
Overdubbing a Recorded Performance
After recording one hand of your performance, you can overdub-
record the performance of the other hand.
You can also overdub-record onto a built-in song.
Left (or right) part Right (or left) part
Getting ready to record
1. Press the [ ] button.
The Song screen appears.
MEMO
If the measure screen appears, press the [ ] button to return to
the song-select screen.
2. Turn the [ ] knob to select the category of the song
that you want to overdub, and press the [ ] knob to
conrm.
3. Turn the [ ] knob to select the song that you want
to overdub.
You can select songs within the category.
MEMO
If you’re recording your performance along with a built-in song,
you can x the tempo of the built-in song (p. 12).
4. Press the [t] button.
The [t] button lights, the [s] button blinks, and the piano
enters record-standby mode.
If you decide to cancel recording, press the [t] button once again.
5. Turn the [ ] knob to access the “Overdub” screen.
The song of step 3 is selected.
6. Press the [Part] button; if a part that you don’t want to
record is blinking, turn the [ ] knob to select the part,
and press the [ ] knob to make it go dark.
If you select a part that is already recorded (lit) and then press the
[ ] knob to make it blink, that part will be overwrite-recorded.
Starting/stopping recording
7. Press the [s] button.
After a one-measure count, recording starts, and the [7]
button and [s] button are both lit. The performance is saved
automatically.
MEMO
You can also start recording by playing the keyboard instead of
pressing the [s] button. In this case, a count is not sounded.
8. To stop recording, press the [s] button once
again.
Recording stops.
Recording Audio to USB Flash Drive
If you audio-record your performance, you’ll be able to listen to it on
your computer or audio player, use it to create a music CD, or publish
it on the internet.
Getting ready to record
1. Connect your USB ash drive to the USB Memory
port.
* Audio data can’t be saved in the piano’s internal memory.
* Never turn o the power or disconnect a USB ash drive or the
power cord while the USB ash drive access indicator is blinking.
2. Select the tone that you want to play.
3. Hold down the [7] button and turn the [ ] knob to
select “Audio.”
MEMO
You can also specify this via the Function mode “Recording Mode”
setting (p. 25).
4. Press the [t] button.
The [t] button lights, the [s] button blinks, and the piano
enters record-standby mode.
If you decide to cancel recording, press the [t] button once again.
5. You can sound the metronome if you like.
Starting/stopping recording
6. Press the [s] button.
Recording starts, and the [t] button and [s] button are lit. The
performance is saved automatically.
NOTE
Never turn o the power or disconnect the USB ash drive during
recording.
7. To stop recording, press the [s] button once
again.
Recording stops.
MEMO
5You can delete the song that you recorded (p. 13).
5You can rename the song that you recorded (p. 13).
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland LX705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland LX705 in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland LX705

Roland LX705 User Manual - German - 38 pages

Roland LX705 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info