Function mode0“Bluetooth audio”0turn“Bluetooth audio” On
Bluetooth Turn/MIDI function:
Function mode0“Bluetooth Turn/MIDI”0turn “Bluetooth Turn & MIDI (*1)” On
(*1) Depending on the Function mode “Bluetooth Turn/MIDI” setting, the screen might indicate
“BluetoothPage Turn” or “Bluetooth MIDI.”
p. 21
If Bluetooth Audio function is “On”A device named “(model name) Audio” appears.
–
If the Bluetooth Page Turn function is “On” and
the Bluetooth Turn/MIDI function is “Page Turn” or
“Page Turn&MIDI”
A device named “(model name)” appears.
If the Bluetooth Page Turn function is “On” and the
Bluetooth Turn/MIDI function is set to “MIDI” or
“Page Turn&MIDI”
You can check this from a setting inside your app such as GarageBand.
Can’t connect to Bluetooth
audio
If this unit is visible as a device in the mobile
device’s Bluetooth settings
Delete the device’s registration, turn the Bluetooth Audio function “O” and then “On”
again, and establish pairing once again.
p. 21
If this unit is not visible as a device
Turn the mobile device’s Bluetooth function o and then on again, and initiate pairing
from this unit to re-establish pairing.
Can’t connect to Bluetooth
page turning
In some cases, the connection with the mobile device might become unavailable when you switch the Bluetooth Turn/MIDI function.
–
If this unit is not visible as a device in the mobile
device’s Bluetooth settings
Delete the device from the Bluetooth settings, turn the mobile device’s Bluetooth
function o and on again, and reestablish the connection.
If this unit is not visible as a device
Turn the mobile device’s Bluetooth function o and on again, and then reestablish the
connection.
Can’t connect to Bluetooth
MIDI
In some cases when you switch the Bluetooth Turn/MIDI function, the connection with the mobile device might become unavailable.
Delete the device from the Bluetooth settings, turn the mobile device’s Bluetooth function o and on again, and reestablish the connection.
Can’t connect via MIDI
Bluetooth MIDI is only compatible with iOS. Also, you must make the connection not from the mobile device’s Bluetooth setting but from
the setting within GarageBand or other app that you’re using.
Can’t establish pairing with
the page turning function
and MIDI function
The page turning function and MIDI function are paired when you rst select a device on the mobile device and establish a connection. There
is no need to initiate pairing from this unit.
Can’t use the page turning
function and MIDI function
simultaneously
Set the Bluetooth Turn/MIDI function to “Page Turn&MIDI.”
Can’t connect a paired
mobile device
If the connection breaks immediately after it is established, or when you switch the page turning function and MIDI data transmit/receive
function, turning the Bluetooth device’s Bluetooth switch o and then on again may allow connection to occur.
Keyboard no longer
appears (becomes
unavailable) on the mobile
device
When using the page turning function, the keyboard might not be shown (might be unavailable) depending on the mobile device that you’re
using.
If you want the mobile device’s keyboard to be shown while you’re using the page turning function, hold down this unit’s [Accomp] button
and press the [Left] button.
To hide the mobile device’s keyboard, hold down the [Accomp] button and press the [Left] button.
°
Error Messages
IndicationMeaning
Error 2
An error occurred during writing. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media (p. 17).
The internal memory might be damaged. Format the internal memory (p. 17).
Error 10
No external media is inserted. Insert the external media and try again.
The internal memory might be damaged. Format the internal memory (p. 17).
Error 11
There is not sucient free memory in the save destination.
Either insert other external media or delete unneeded les and try again.
Error 14
An error occurred during reading. The external media may be corrupted.
Insert other external media and try again. Alternatively, you can initialize the external media (p. 17).
The internal memory might be damaged. Format the internal memory (p. 17).
Error 15The le is unreadable. The data format is not compatible with the unit.
Error 18
This audio format is not supported.
Please use 44.1 kHz 16-bit linear WAV format audio les.
Error 30Internal memory capacity of the unit is full.
Error 40
The unit cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the unit.
Error 43A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.
Error 51
There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the Roland
service center.
Error 65
The USB ash drive connector was subjected to excessive current. Make sure that there is no problem with the external media, then turn the power o, then
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roland LX-17 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roland LX-17 in the language / languages: English as an attachment in your email.
The manual is 7,85 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
