674614
21
Zoom out
Zoom in
Previous page
1/30
Next page
21
Advanced Operation
Provision of Bluetooth functionality
Please be aware that depending on the country in which you
purchased the unit, Bluetooth functionality might not be included.
The Bluetooth logo appears
when you turn on the power.
If Bluetooth functionality is included
Heres What You Can Do
Bluetooth functionality creates a wireless connection between a
mobile device such as a smartphone or tablet (subsequently referred to
as the mobile device”) and this unit, allowing you to do the following.
Bluetooth audio
Music data played back by the mobile device can be heard through
this unit’s speakers.
Page-turning
A music score display app on the mobile device can be controlled
from this unit.
MIDI data transmission and reception
MIDI data can be exchanged between this unit and the mobile device.
Using Bluetooth Audio
Registering a Mobile Device (Pairing)
“Pairing is the procedure by
which the mobile device that
you want to use is registered
on this unit (the two devices
recognize each other).
Make settings so that music data
saved on the mobile device can
be played wirelessly via this unit.
MEMO
5 Once a mobile device has been paired with this unit, there is
no need to perform pairing again. If you want to connect this
unit with a mobile device that has already been paired, refer
to “Connecting an Already-Paired Mobile Device” (p. 21).
5 Pairing is required again if you execute a Factory Reset (p. 17).
5 The following steps are one possible example. For details,
refer to the owner’s manual of your mobile device.
1. Place the mobile device that you want to connect nearby
this unit.
MEMO
If you have more than one unit of this model of unit, power-on
only the unit that you want to pair (power-o the other units).
2. Press the [Ambience] button and [Brilliance] button
simultaneously.
3. Use the [K] [J] buttons to select Bluetooth Audio, and
then press the [s] (Enter) button.
The Bluetooth Audio screen appears.
4. Use the [K] [J] buttons to select Bluetooth Pairing, and
then press the [s] (Enter) button.
The display indicates “Now pairing..., and this unit waits for a
response from the mobile device.
MEMO
If you decide to cancel pairing, press the [u] (Exit) button.
5. Turn on the Bluetooth function of the mobile device.
MEMO
The explanation here uses the iPhone as an example. For details,
refer to the owner’s manual of your mobile device.
6. Tap “LX-17 Audio” or “LX-7 Audio that is shown in the
Bluetooth device screen of your mobile device.
This unit is paired with the mobile device. When pairing succeeds, LX-17
Audio or “LX-7 Audio” is added to the list of “Paired Devices on your
mobile device.
MEMO
If the mobile device’s screen asks you to enter a “Pass Key, enter
“0000” (four zeros).
7. Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Specifying the Bluetooth ID
You can specify a number that is added following the device
name of this unit when it is displayed by a Bluetooth-
connected application.
If you own multiple units of the same instrument, this is a
convenient way to distinguish them.
1. Press the [Ambience] button and [Brilliance] button
simultaneously.
2. Use the [K] [J] buttons to select Bluetooth ID, and
then press the [s] (Enter) button.
3. Use the [–] [+] buttons to edit the value of the setting.
Value Explanation
0–99
Example) For the LX-17
Set to “0”: “LX-17 Audio”, “LX-17” (default value)
Set to “1”: “LX-17 Audio1”, “LX-17_1”
Connecting an Already-Paired Mobile Device
1. Turn on the Bluetooth function of the mobile device.
MEMO
5 If you were unable to establish a connection using the
procedure above, tap “LX-17 Audio or “LX-7 Audio that
is displayed in the Bluetooth device screen of the mobile
device.
5 To disconnect, either turn this unit’s Bluetooth Audio function
“O (Function mode0Bluetooth Audio0Bluetooth
Audio O) or turn the mobile devices Bluetooth function o.
Adjusting the Volume of Bluetooth Audio
Normally you’ll adjust the volume on your mobile device.
If this does not provide the volume adjustment you want, you can
adjust the volume as follows.
1. Proceed with steps 2–3 of “Registering a Mobile Device
(Pairing)” (p. 21).
2. Use the [K] [J] buttons to select Bluetooth Volume, and
use the [–] [+] buttons to adjust the volume.
Pairing
˙
Using the Bluetooth® Functionality
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland LX-17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland LX-17 in the language / languages: English as an attachment in your email.

The manual is 7,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland LX-17

Roland LX-17 User Manual - German - 30 pages

Roland LX-17 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info