537670
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
Het bedieningspaneel
THRU OUT-gedeelte
7. THRU OUT jacks
Signalen die via de INPUT jacks binnenkomen, worden hier
ongewijzigd weer uitgestuurd.
Dit komt van pas wanneer u toestellen aansluit die geen
SUBWOOFER OUT. Meer instructies hierover vindt u in
“Aansluiten op toestellen zonder SUBWOOFER OUT” (p. 9).
Er zijn 2 soorten connectors voorzien: XLR-connectors en
1/4” phone jacks. Gebruik de connector die overeenstemt
met het toestel dat u gebruikt.
Deze output jacks leveren line level output van +4 dBu.
* De THRU OUT jacks sturen geen signalen uit wanneer het
toestel uitgeschakeld is.
* De PHASE-schakelaar, de BOTTOM-schakelaar en de
CROSSOVER-knop hebben geen invloed op de output van de
THRU OUT.
* Wanneer er enkel in de INPUT L (MONO) jack een signaal
binnenkomt, wordt het signaal door de L- en R-jacks van de
THRU OUT uitgestuurd.
8. GND LIFT-schakelaar
Hiermee maakt/verbreekt u de verbinding tussen de GND-
pinnen van de THRU OUT XLR-connectors en de aarding
van de KCW-1.
Als u problemen hebt met ruis die waarschijnlijk veroorzaakt
wordt door een grondlus, dan kan u deze mogelijk oplossen
door de schakelaar te verzetten.
9. POWER-schakelaar
Hiermee zet u het toestel aan en uit.
* Zet steeds de VOLUME-knop op 0 alvorens het toestel aan of
uit te zetten.
* Dit toestel is uitgerust met een beveiligingscircuit. Na het
aanzetten duurt het heel even (enkele seconden) voordat de
normale werking begint.
* Op p. 10 leest u in welke volgorde u de aangesloten toestellen
moet in- en uitschakelen.
10. POWER-indicator
Deze licht op wanneer het toestel aan staat.
11. AC-aansluiting
Sluit hier de bijgeleverde stroomkabel aan. Zorg dat de kabel
goed aangesloten is zodat hij niet per ongeluk wordt
uitgetrokken.
Voorpaneel
12. Activiteitsindicator
Deze licht op wanneer het toestel aan staat. Wanneer er een
foot switch wordt gebruikt om de speaker van de KCW-1 in
of uit te schakelen, dan knippert deze indicator.
12
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland KCW-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland KCW-1 in the language / languages: Dutch as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info