537658
139
Zoom out
Zoom in
Previous page
1/192
Next page
141
JX-305 – Handleiding
hoort u dus automatisch die Groove, zonder dat u
daarvoor opnieuw de relevante Play Quantize instel-
lingen hoeft te maken.
Opgelet: Deze functie bewerkt altijd alle maten van de
geselecteerde Part.
1.
Kies het Pattern dat u wilt bewerken.
2.
Maak de Play Quantize-instellingen die u de
gewenste groove opleveren (zie blz. 64).
Opgelet: Dit moet u absoluut doen. Als u dat namelijk niet
doet, valt er niets over te nemen. In dat geval verschijnt de
volgende waarschuwing:
3.
Druk op [STOP/PLAY] om de weergave van het
Pattern stoppen.
4.
Druk op [EDIT].
5.
Druk op NUMBER [7] (QUANTIZE) en kies met
PAGE [>] de optie EDIT QTZ.
6.
Kies de Part(s) die u wilt bewerken.
Opgelet: U kunt ook meerdere Parts tegelijk kiezen.
Opgelet: De indicators lichten reeds op voor de Parts
waarop Play Quantize actief is (dit zijn de Parts die u met
[QTZ SELECT] hebt gekozen). Wilt u geen andere Parts
kiezen, dan mag u meteen naar stap 7.
7.
Druk op [ENTER].
De JX-305 vraagt om bevestiging van uw keuze (Are
You Sure?).
8.
Druk nogmaals op [ENTER] om de data te bewer-
ken. Zodra dat is gebeurd, keert u terug naar het
vorige display.
Play Quantize wordt nu automatisch uitgeschakeld.
14.2 Individuele noten editen
(Microscope Edit)
Met editen bedoelen we het wijzigen van bepaalde
parameters, in dit geval de eigenschappen (startpunt,
lengte enz.) van individuele noten. De JX-305 biedt
hiervoor de Microscope-pagina.
1.
Houd [SHIFT] ingedrukt terwijl u op [M.SCOPE]
drukt (indicator licht op).
Opgelet: In de Microscope-mode wordt automatisch de
Single-klaviermode gekozen. Split en Dual zijn hier dus niet
beschikbaar.
Opgelet: Tijdens de Step-opname kunt u de Microscope-
pagina oproepen door op [REC] te drukken.
Opgenomen noten afbeelden
met de [VALUE]-draaischijf kiest u de positie van
opgenomen noten. Het display beeldt die positie en
het type van de momenteel geselecteerde data af.
Draai de [VALUE]-draaischijf naar links om naar een
voorafgaand “Event te gaan, en naar rechts om naar
een navolgend Event te gaan. (Dat kunt u trouwens
ook met [BWD] en [FWD] doen.) Als u [SHIFT]
ingedrukt houd terwijl u de [VALUE]-draaischijf
gebruikt, kunt u in stappen van 1 Clock voor- of
teruggaan.
Opgelet: Een “*” achter de ® in het display geeft aan dat
er zich twee of meer MIDI-commandos op dezelfde plaats
bevinden.
U kunt nu met de PART-knoppen een andere Part kie-
zen. Kiest u de Rhythm Part (“R”), dan kunt u ook
Rhythm Tones kiezen.
Opgelet: Druk op [REC] om terug te keren naar een
opname-mode.
FX ON /OFF
EDIT
CHG EVENT
7
HIT
Maat Tel Clock
Weergavepositie
Volgende positie
Volgende positie
maat 1
tel 1
Clock 24
maat 1
tel 1
Clock 85
maat 1
tel 2
Clock 30
E4
C4D3
G4
96 Clocks=
139


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland JX-305 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland JX-305 in the language / languages: Dutch as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info