499471
18
Zoom out
Zoom in
Previous page
1/136
Next page
18
Getting Ready
2.
Insert the batteries into the battery compartment, taking
care to observe the correct polarity (+/- orientation).
fig.BattCase-2.eps
Carefully follow the installation instructions for batteries, and
make sure you observe the correct polarity.
3.
Securely close the battery compartment cover.
To remove the batteries, power off the JUNO-Di, open the battery
compartment cover, and remove the batteries.
When the batteries run down, the BATTERY indicator located at the left of
the display will light or blink.
The BATTERY indicator will light when the batteries run low.
If you continue using the JUNO-Di, the indicator will blink;
please recharge the batteries.
If you continue use even though the indicator is blinking,
the display will indicate “Battery Low!” and further operation
will be impossible.
The BATTERY indicator is only an approximation.
To reduce battery consumption, you can turn off the display’s
backlight when it is not required. Refer to “Turning the Display
Backlight On/Off” (p. 21).
You can also set the system setting “POWER SAVE MODE” to
save power. For details, refer to “Making Settings that are
Common to the Entire JUNO-Di (SYSTEM)” (p. 75).
Since JUNO-Di contains no amplifier or speakers, you’ll need to connect it
to audio equipment such as a keyboard amplifier, monitor speaker
system or home stereo, or use headphones to hear its sound.
In order to fully experience the JUNO-Di’s sound, we recommend using a
stereo amp/speaker system. If you’re using a mono system, however,
make your connections to the JUNO-Di’s OUTPUT L/MONO jack.
Audio cables are not included with the JUNO-Di. You’ll need to
provide them.
921
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
fig.connect-output_e.eps
Removing Batteries
When to Replace the Batteries
(BATTERY Indicator)
Connecting the External Equipment
Connecting Speakers or Headphones
Stereo
headphones
Monitor speakers
(powered)
Power amp
Mixer etc.
JUNO-Di_e.book 18 ページ 2009年6月22日 月曜日 午前9時23分
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Juno Di at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Juno Di in the language / languages: English as an attachment in your email.

The manual is 13,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info