499471
14
Zoom out
Zoom in
Previous page
1/136
Next page
14
Panel Descriptions
fig.Front.eps_70
USB MEMORY Connector
You can connect USB memory (sold separately) to this connector.
931
* Carefully insert the USB memory all the way in-until it is firmly in place.
* Connect the USB memory after you turn on the JUNO-Di’s power.
Never disconnect the USB memory while the JUNO-Di is powered up.
D BEAM Controller
You can apply various effects to the sound by moving your hand above
the D Beam controller.
Use the three buttons below it to turn the D Beam controller on/off.
A setting screen will appear when you press this button to turn it on.
[SOLO SYNTH] Button
This button lets you use the D Beam controller to play the JUNO-Di like a
monophonic synthesizer (p. 63).
[EXPRESSION] Button
This button lets you use the D Beam controller to create expressive
changes in the volume (p. 63).
[ASSIGNABLE] Button
This button lets you assign various functions to the D Beam controller
(p. 63).
* By holding down the [SHIFT] button and pressing one of these
buttons, you can access the corresponding edit screen without turning
the button on/off.
[VOLUME] Knob
Adjusts the overall volume that is output from the rear panel OUTPUT
jacks and PHONES jack (p. 20).
MODE/MIC
[MENU] Button
This button displays a menu from which you can choose system settings
or utility functions. This button is also used when you want to edit sounds
or other settings in detail.
[MIDI CONTROLLER] Button
Selects MIDI Controller mode, allowing you to control an external MIDI
sound generator (p. 81).
[PREVIEW] Button
Hold down this button to audition the currently selected sound (p. 25).
MIC IN [VOLUME] Knob
Adjusts the volume of the input from MIC INPUT jack (p. 43).
MIC IN [REVERB] Button
This button applies reverb to the sound that’s being input via the MIC
INPUT jack (p. 43).
KEYBOARD
[SPLIT] Button
This button turns on “Split,” which lets you play two different tones with
the left and right hands (p. 33).
[DUAL] Button
This button turns on “Dual,” allowing you to play two layered tones (p. 31).
[SUPER LAYER] Button
This button turns on “Super Layer,” which makes a single tone richer or
more spacious (p. 41).
[ARPEGGIO] Button
Turns the arpeggio on/off.
A setting screen will appear when you press this button to turn it on
(p. 37, p. 67).
[CHORD MEMORY] Button
Turns the chord memory function on/off.
A setting screen will appear when you press this button to turn it on
(p. 37, p. 69).
[V-LINK] Button
Turns the V-LINK on/off.
A setting screen will appear when you press this button to turn it on
(p. 70).
[TRANSPOSE] Button
By holding down the [TRANSPOSE] button and using the [-] [+] buttons,
you can raise or lower the key range in semitone steps (p. 44).
OCTAVE [DOWN] [UP] Buttons
These buttons raise or lower the key range in steps of an octave (p. 34).
Front Panel
1 2 3 4 5 6
1
2
3
4
5
JUNO-Di_e.book 14 ページ 2009年6月22日 月曜日 午前9時23分
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland Juno Di at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland Juno Di in the language / languages: English as an attachment in your email.

The manual is 13,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info