757700
6
Zoom out
Zoom in
Previous page
1/112
Next page
6
IMPORTANT NOTES
562
Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this unit.
The use of such cables can cause the sound level to be
extremely low, or impossible to hear. For information on
cable specifications, contact the manufacturer of the cable.
563
Unauthorized duplication, reproduction, hiring, and
lending prohibited.
566b
The sensitivity of the D Beam controller will change
depending on the amount of light in the vicinity of the unit.
If it does not function as you expect, adjust the sensitivity as
appropriate for the brightness of your location.
Using USB Memory
704
When connecting USB memory, firmly insert it all the way
in.
705
Do not touch the pins of the USB memory connector, or
allow them to become dirty.
708
USB memory is made using high-precision electronic
components, so please observe the following points when
handling it.
To prevent damage from static electrical charges,
discharge any static electricity that might be present in
your body before handling USB memory.
Do not touch the terminals with your fingers or any metal
object.
Do not bend or drop USB memory, or subject it to strong
impact.
Do not leave USB memory in direct sunlight or in
locations such as a closed-up automobile. (Storage
temperature: 0–50 degrees C)
Do not allow USB memory to become wet.
Do not disassemble or modify USB memory.
Addition
When connecting USB memory, position it horizontally with
the USB memory connector and insert it without using
excessive force. The USB memory connector may be
damaged if you use excessive force when inserting USB
memory.
Addition
Do not insert anything other than USB memory (e.g., wire,
coins, other types of device) into the USB memory
connector. Doing so will damage the USB memory
connector.
Addition
Do not apply excessive force to the connected USB
memory.
Addition
Attach the USB memory cover when you’re not using USB
memory.
Handling CD-ROMs
801
Avoid touching or scratching the shiny underside (encoded
surface) of the disc. Damaged or dirty CD-ROM discs may
not be read properly. Keep your discs clean using a
commercially available CD cleaner.
Copyright
204
* Microsoft and Windows are registered trademarks of
Microsoft Corporation.
206e
* The screen shots in this document are used in compliance
with the guidelines of the Microsoft Corporation.
213
* Pentium is a registered trademark of Intel Corporation.
220
* All product names mentioned in this document are trade-
marks or registered trademarks of their respective owners.
238
* MPEG Layer-3 audio compression technology is licensed
from Fraunhofer IIS Corporation and THOMSON Multi-
media Corporation.
add
* MatrixQuest™ 2008 TEPCO UQUEST, LTD.
All rights reserved.
The GW-8’s USB functionality uses Matrix-
Quest middleware technology from TEPCO
UQUEST, LTD.
GW-8_e.book 6 ページ 2008年4月1日 火曜日 午前11時44分
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland GW-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland GW-8 in the language / languages: English as an attachment in your email.

The manual is 6,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info