533144
43
Zoom out
Zoom in
Previous page
1/72
Next page
43
Hoofdstuk 6 Appendix
General Purpose #3
STATUS
SECOND THIRD
BnH 12H vvH
n=MIDI Channle Number: 0H - FH (ch.1 - ch.16)
vv=Control Value: 00H - 7FH (0 - 127)
* Transmitted the envelope data of the strings when “E FLW “ is on.
* Data is sent only in Mono mode. Transmission doesn’t take place in Poly mode.
Hold1
STATUS
SECOND THIRD
BnH 40H vvH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
vv=Control value: 00H - 7FH (0 - 127)
01H-3FH=OFF, 40H-7FH=ON
* Transmitted the operation of HOLD TYPE = “H4”.
RPN MSB/LSB
STATUS
SECOND THIRD
BnH 65H mmH
BnH 64H llH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm=Upper byte of the parameter data designated by RPN
ll=Lower byte of the parameter data designated by RPN
<<< RPN >>>
Control change includes RPN(registered parameter number), function which are defined by
the MIDI standard.
The GR-20 can transmit only one RPN: pitch bend sensitibity(RPN#0).
RPN Data entry
MSB LSB
MSB LSB Function
00H 00H 18H 00H pitch bend sensitivity
Program change
STATUS SECOND
CnH ppH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
pp=Program Number: 00H - 7FH (prg.1 - prg.128)
* The recognized Program Change Number corresponds to each Patch as follows.
BANK MSB PROGRAM NUMBER Patch
0 0 USER 1
0 1 USER 2
0 2 USER 3
0 3 USER 4
0: :
0 97 USER 98
0 98 USER 99
1 0 PIANO 1
1 1 PIANO 2
1 2 PIANO 3
::
2 0 ORGAN/KB 1
2 1 ORGAN/KB 2
2 2 ORGAN/KB 3
::
3 0 BASS/GTR 1
3 1 BASS/GTR 2
3 2 BASS/GTR 3
::
4 0 BRASS 1
4 1 BRASS 2
4 2 BRASS 3
::
5 0 WIND 1
5 1 WIND 2
5 2 WIND 3
::
6 0 STRING/ORCH 1
6 1 STRING/ORCH 2
6 2 STRING/ORCH 3
::
7 0 SYNTH/LEAD 1
7 1 SYNTH/LEAD 2
7 2 SYNTH/LEAD 3
::
8 0 VOICE/PAD 1
8 1 VOICE/PAD 2
8 2 VOICE/PAD 3
::
9 0 ETHNIC 1
9 1 ETHNIC 2
9 2 ETHNIC 3
::
10 0 RYTHM/PERC 1
10 1 RYTHM/PERC 2
10 2 RYTHM/PERC 3
::
Pitch Bend Change
STATUS
SECOND THIRD
EnH llH mmH
n=MIDI Channel Number: 0H - FH (ch.1 - ch.16)
mm,ll=Value: 00H, 00H - 7FH, 7FH (-8192 - +8191)
System Realtime Message
Active Sensing
STATUS
FEH
* This message is always transmitted at about 270msec’ interval.
System Exclusive message
STATUS
SECOND THIRD
F0H iiH,ddH,.....,eeH F7H
F0H: System Exclusive
ii=ID Number: 41H (65)
dd,...,ee=Data: 00H-7FH (0-127)
F7H: EOX (End of Exclusive/System Common
Message)
* For more details, refer to the page “Roland exclusive message” and Section3 or after.
3. Exclusive communicaties
De GR-20 kan systeem en Patch parameters versturen en ontvangen met behulp van system
exclusive berichten. Model ID van exclusive bericht beschikbaar op de GR-20 is 00H 72H.
Device ID is vastgesteld op 10H.
Als de GR-20 een Identify Request inquiry bericht ontvangt, dan zal het een Identity Reply
versturen.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland GR-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland GR-20 in the language / languages: Dutch as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info