805072

Roland GP-9 Manual

11
Zoom out
Zoom in
Previous page
1/38
Next page
11
Performing
Playing in a Dierent Key (Transpose)
You can transpose the keyboard in semitone steps.
For instance, if you wanted to play a song in the key of C that was written in
the key of E, set the keyboard transpose value to “4”.
When you play “C-E-G”, you hear “E G B”
1. Press the [ ] button.
2. Press the [–] [+] buttons to select “Kbd Transpose”.
3. Press the [ ] button.
4. Press the [–] [+] buttons to select a value.
Value -6–0–5 (default value: 0)
5. Press the [ ] button to exit Keyboard mode.
Reading the note name (e.g., C4)
The alphabetical indication for settings such as “split point” shows the
name of the note. The solfege equivalents are as follows: A is “la”, B is
“ti”, C is “do”, D is “re”, E is “mi”, F is “fa” and G is “so”.
For example, the indication “C4” means “the fourth ’C’ from the left
edge of the keyboard”.
Change the Key Touch (Key Touch)
You can change the playing feel (touch) of the keyboard.
1. Press the [ ] button.
2. Press the [–] [+] buttons to select “Key Touch”.
3. Press the [ ] button.
4. Press the [–] [+] buttons to select a value.
Value Explanation
Fix, 1–100
(default value: 50)
The default value of 50 provides a key touch that is closest
to that of an acoustic piano. Higher settings make the
keyboard feel heavier. With the “Fix”, notes sound at a xed
volume regardless of how strongly you play the keyboard.
5. Press the [ ] button to exit Keyboard mode.
Adjusting the Time from When You Play the Key Until
the Piano Is Heard (Hammer Response)
You can adjust the time from when you play the key until the piano sound
is heard.
1. Press the [ ] button.
2. Press the [–] [+] buttons to select “Hammer Response”.
3. Press the [ ] button.
4. Press the [–] [+] buttons to select a value.
Value Explanation
O, 1–10
(default value: 1) Higher values produce a greater delay.
5. Press the [ ] button to exit Keyboard mode.
Registering Your Favorite Settings
You can register the settings you’ve adjusted to the way you like, and then
switch between settings for each song or for dierent players.
Registering the current performance settings
1. Long-press the [ ] button.
The “Store Registration” screen appears.
2. Use the [1] [2] [3] [4] buttons and the [–] [+] buttons to select
the registration number where you want to store the current
settings, and press the [ ] button to execute.
3. Edit the name.
a. Press the [–] [+] buttons to select the character to edit, and
press the [ ] button to execute.
b. Press the [–] [+] buttons to edit the character, and press
the [ ] button to execute.
¹To insert a character, press the [ò] button.
¹To delete a character, press the [ó] button.
3. Using the steps for editing a character, press the [–] [+] buttons
to select µ on the right side of the screen, and press the [ ]
button to execute.
The Registration screen appears, and the settings you registered are
shown.
MEMO
When you select “Start-up”, you can register these settings as the
settings used right when the instrument is turned on.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland GP-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland GP-9 in the language / languages: English as an attachment in your email.

The manual is 4.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland GP-9

Roland GP-9 User Manual - German - 38 pages

Roland GP-9 User Manual - Dutch - 38 pages

Roland GP-9 User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info