533118
130
Zoom out
Zoom in
Previous page
1/138
Next page
®
MIDI implementatie
130
r
FR-7x V-Accordion
1. Received data
Channel Voice Messages
Note off
Note on
Control Change
The value specified by a Control Change message is not reset by a Program
Change, etc.
Bank Select (Controller number 0, 32)
Only for Free Bass .
Expression (Controller number 11)
This adjusts the volume of a Part. It can be used independently from Volume
(CC07) messages. expressieberichten are used for musical expression within a
performance, e.g., expressiepedaal movements, crescendo en decrescendo.
Hold 1 (Controller number 64)
Program Change
Channel Pressure
System Realtime Messages
Active Sensing
When Active Sensing is received, the FR-7x starts monitoring the intervals of alle
further messages. While monitoring, if the interval between messages exceeds
420 ms, the same processing will be carried out as when Alle Sounds Off, Alle
Notes Off en Reset Alle Controllers are received, en message interval monitoring
will be halted.
Start
When an FA message is received from an external MIDI device such as sequenc-
er, the FR-7x sends alle necessary MIDI information for a song header setup: Tre-
ble, Orchestra, Bass/Free, Orchestra Bass, sound setup.
2. Transmitted data
Channel Voice Messages
Note off
Note on
Pitch Bend change
Control Change
Bank Select (Controller number 0, 32)
Modulation (Controller number 1)
Volume (Controller number 7)
Volume messages are used to adjust the volume balance of each Part.
Pan (Controller number 10)
Expression (Controller number 11)
This adjusts the volume of a Part. expressieberichten are used for musical expres-
sion within a performance, e.g., expressiepedaal movements, crescendo en de-
crescendo.
Hold 1 (Controller number 64)
Effect 1 (Reverb Send Level) (Controller number 91)
This message adjusts the Reverb Send Level of each Part.
22. MIDI implementatie
Status 2nd byte 3rd byte
8nH kkH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
kk = nootnummer: 00H~7FH (0~127)
vv = note off velocity: 00H~7FH (0~127)
Status
2nd byte 3rd byte
9nH kkH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
kk = nootnummer: 00H~7FH (0~127)
vv = note on velocity: 01H~7FH (1~127)
Status
2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
mm = Bank number MSB: 00H~7FH
ll = Bank number LSB: 00H~7FH
Status
2nd byte 3rd byte
BnH 0BH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Expression: 00H~7FH (0~127)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Control value: 00H~7FH (0~127)
00H~63H= Off/64H~7FH= On
Status
2nd byte
CnH ppH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
pp = Program number: 00H~0DH: hoge registers 1~14
00H~19H: Orchestra Register 1~26
00H~06H: Bass/FreeBass/Orch.Bass/Orch
Chord, Orch Free Bass Register 1~7
00H~50H: Set 1-~80
Status
2nd byte
DnH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Channel Pressure: 00H~7FH (0~127)
Status
FEH
Status
FAH
Status
2nd byte 3rd byte
8nH kkH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
kk = nootnummer: 00H~7FH (0~127)
vv = note off velocity: 00H~7FH (0~127)
Status
2nd byte 3rd byte
9nH kkH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
kk = nootnummer: 00H~7FH (0~127)
vv = note on velocity: 01H~7FH (1~127)
Status
2nd byte 3rd byte
EnH llH mmH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
mm, ll= Pitch Bend value: 00 00H~40 00H~7F 7FH (–8192~0~+8192)
Status
2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
mm = Bank number MSB: 00H~7FH
ll = Bank number LSB: 00H~7FH
Status
2nd byte 3rd byte
BnH 01H vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Volume: 00H~7FH (0~127), Initial value = 64H (100)
Status
2nd byte 3rd byte
BnH 07H vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Volume: 00H~7FH (0~127), Initial value = 64H (100)
Status
2nd byte 3rd byte
BnH 0AH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = pan: 00H~40H~7FH (Left~Center~Right),
Initial value = 40H (Center)
Status
2nd byte 3rd byte
BnH 0BH vvH
BnH 2BH vvL (only when “Bellows TX Resolu-
tion” on page 110 is set to ‘Super’).
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Expression: 00H~7FH (0~127)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Control value: 00H~7FH (0~127)
00H~63H= Off/64H~7FH= On
Status
2nd byte 3rd byte
BnH 5BH vvH
n = MIDI-kanaal number: 0H~FH (Ch.1~16)
vv = Reverb Send Level: 00H~7FH (0~127), Initial value = 28H (40)
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland FR-7X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland FR-7X in the language / languages: Dutch as an attachment in your email.

The manual is 10,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info