532825
71
Zoom out
Zoom in
Previous page
1/80
Next page
MIDI implementatie
V-Accordion
r
71
MIDI implementatie
1. Received data
Channel Voice Messages
Note off
Note on
Control Change
The value specified by a Control Change message is not reset by a Program
Change, etc.
Bank Select (Controller number 0, 32)
Only for Free Bass.
Expression (Controller number 11)
This adjusts the volume of a Part. It can be used independently from Volume
(CC07) messages. Expression messages are used for musical expression within
a performance, e.g., expression pedal movements, crescendo and decrescendo.
Program Change
System Realtime Messages
Active Sensing
When Active Sensing is received, the FR-3x starts monitoring the intervals of all
further messages. While monitoring, if the interval between messages exceeds
420 ms, the same processing will be carried out as when All Sounds Off, All Notes
Off and Reset All Controllers are received, and message interval monitoring will
be halted.
2. Transmitted data
Channel Voice Messages
Note off
Note on
Control Change
Bank Select (Controller number 0, 32)
Mdulation number (Controller number 01)
Expression (Controller number 11)
This adjusts the volume of a Part. Expression messages are used for musical ex-
pression within a performance, e.g., expression pedal movements, crescendo and
decrescendo.
Program Change
Pitch Bend Change
System Realtime Messages
Active Sensing
Start
Stop
3. Program change messages
Status 2nd byte 3rd byte
8nH kkH vvH
n = MIDI channel number: 0H~FH (Ch.1~16)
kk = note number: 00H~7FH (0~127)
vv = note off velocity: 00H~7FH (0~127)
Status
2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H~FH (Ch.1~16)
kk = note number: 00H~7FH (0~127)
vv = note on velocity: 01H~7FH (1~127)
Status
2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI channel number: 0H~FH (Ch.1~16)
mm = Bank number MSB: 00H~7FH
ll = Bank number LSB: 00H~7FH
Status
2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number: 0H~FH (Ch.1~16)
vv = Expression: 00H~7FH (0~127)
Status
2nd byte
CnH ppH
n = MIDI channel number: 0H~FH (Ch.1~16)
pp = Program number: See “3. Program change messages”.
For the Sets, see “SET RX” on p. 72
Status
FEH
Status 2nd byte 3rd byte
8nH kkH vvH
n = MIDI channel number: 0H~FH (Ch.1~16)
kk = note number: 00H~7FH (0~127)
vv = note off velocity: 00H~7FH (0~127)
Status
2nd byte 3rd byte
9nH kkH vvH
n = MIDI channel number: 0H~FH (Ch.1~16)
kk = note number: 00H~7FH (0~127)
vv = note on velocity: 01H~7FH (1~127)
Status
2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
n = MIDI channel number: 0H~FH (Ch.1~16)
mm = Bank number MSB: 00H~7FH
ll = Bank number LSB: 00H~7FH
Status
2nd byte 3rd byte
BnH 01H vvH
n = MIDI channel number: 0H~FH (Ch.1~16)
vv = Modulation depth: 00H~7FH (0~127)
Status
2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number: 0H~FH (Ch.1~16)
vv = Expression: 00H~7FH (0~127)
Status
2nd byte
CnH ppH
n = MIDI channel number: 0H~FH (Ch.1~16)
pp = Program number: 00H~7FH: program no. 1~128
Status
2nd byte 3rd byte
EnH llH mmH
n = MIDI channel number: 0H~FH (Ch.1~16)
mm, ll= Pitch Bend value 00 00H~40 00H~7F 7FH (–8192~0~+8191)
Status
FEH Transmitted about every 250ms.
Status
FAH This message is transmitted when the [METRONOME] switch is
pressed after assigning the ‘2’ option to the ‘MFn’ parameter.
Status
FCH This message is transmitted when the [METRONOME] switch is
pressed after assigning the ‘2’ option to the ‘MFn’ parameter.
CC00 CC32 Program
Change
Register Name
TREBLE REGISTER TX/RX
0 0 1 1 Bassoon
0 0 2 2a Bandon
0 0 3 2b Cello
0 0 4 3 Harmon
0 0 5 4 Organ
0 0 6 5a Accord
0 0 8 5b Master
0 0 11 6a Tremolo
0 0 9 6b Musette
0 0 7 7 Violin
0 0 13 8 Oboe
0 0 12 9a Clarinet
0 0 10 9b Celeste
0 0 14 0 Piccolo
ORCHESTRA (Treble) TX/RX
0 0 1 1 Trombone
0 0 2 2 Trumpet
0 0 3 3 T Sax
0 0 4 4 A Sax
0 0 5 5 Clarinet
0 0 7 6 Harmonica
0 0 9 7 Violin
0 0 11 8 Flute
0 0 26 9 El. Piano
0 0 20 0 Strings
ORGAN (Treble) TX/RX (without rotary effect)
0 0 27 1 Perc Jazz
0 0 28 2 Jazz Ballad
0 0 29 3 Distort Organ
0 0 30 4 Full Organ
0 0 31 5 Overdr Organ
0 0 32 6 Popular Organ
0 0 33 7 Ligh Jazz
0 0 34 8 Bossa
0 0 35 9 Latin
0 0 36 0 Light Latin
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland FR-3X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland FR-3X in the language / languages: Dutch as an attachment in your email.

The manual is 10,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info