710534
48
Zoom out
Zoom in
Previous page
1/68
Next page
Various Settings (Function Mode)
Indication Value Explanation
Rec Mode
Selecting the Format for Recording (Recording Mode)
You can choose whether to record as SMF or as audio.
MEMO
You can also switch the recording mode by holding down the [ ] (Rec) button and using the [–] [+] buttons.
SMF SMF parts will be recorded separately. This allows you to re-record just a single part, or to overdub dierent parts.
Audio The recording will be made as audio data. The recorded song can be used in your computer.
DPdl Prt (*1)
Changing How the Pedal Eects Are Applied (Damper Pedal Part)
When you press the damper pedal during Dual play or Split play, the pedal eect is normally applied to both tones, but you can also select the tone
to which the eect is to be applied.
R+L All enabled
R Applied only to the Tone 1 (in dual mode)/Right-hand Tone (in split mode)
L Applied only to the Tone 2 (in dual mode)/Left-hand Tone (in split mode)
CPdl Fnc
Changing How the Pedals Work (Center Pedal)
When you turn on the power, the center pedal functions as the sostenuto pedal (p. 10).
You can change the function of the pedal to a variety of other operations.
SOST Sets function to sostenuto pedal.
PLAY
The pedal will have the same function as the [
] (Play/Stop) button.
LAYR
Pressing the pedal will layer on Tone 2, used for Dual play.
* The Layer function can be applied only when using Dual play.
OCT
Pressing the pedal will layer on a sound one octave higher.
* The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.
LocalCtl
Preventing Doubled Notes When Connected to a Sequencer (Local Control)
When you have a MIDI sequencer connected via USB, set this parameter to Local O.
Since most sequencers have their Thru function turned on, notes you play on the
keyboard may be sounded in duplicate, or get dropped. To prevent this, you can
enable the “Local O setting so that the keyboard and internal sound generator will be
disconnected.
OFF
Local Control is o.
The keyboard and composer are disconnected from the internal sound generator. Playing the keyboard will not produce sound.
ON
Local Control is on.
The keyboard and composer are connected to the internal sound generator.
MIDI Ch (*1)
MIDI Transmit Channel Settings (MIDI Transmit Channel)
This setting species the MIDI channel on which the unit will transmit.
MIDI uses sixteen “MIDI channels, which are numbered 1 through 16. By connecting MIDI devices (USB MIDI) and specifying the appropriate MIDI
channel for each device, you can play or select sounds on those devices.
The unit will receive all sixteen channels (1–16).
OFF, 1–16
SaveSong
Renaming a Song (Save Song)
Here’s how to rename a song you’ve saved (p. 38).
CopySong
Copying a Saved Song (Copy Song)
A song you’ve saved to the internal memory can be copied to the USB ash drive. Alternatively, a song saved to the USB ash drive can be copied to
the internal memory. (p. 40)
Del Song
Deleting a Saved Song (Delete Song)
You can delete a saved song from the internal memory or the USB ash drive. (p. 40)
Format
Initializing the Memory (Format Media)
You can delete all songs from the internal memory or a separately sold USB ash drive. (p. 41)
MIDI
Sequencer
Local Control
Sound Generator
USB MIDI
In
USB MIDI
Out
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DP90Se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DP90Se in the language / languages: English as an attachment in your email.

The manual is 32,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info