710534

Roland DP90Se Manual

41
Zoom out
Zoom in
Previous page
1/68
Next page
Convenient Functions
5. Press the [ ] (Fast) button.
6. Use the [–] [+] buttons to select the song that you want to
delete.
7. Press the [Song] button.
A conrmation message will appear.
8. Press the [ ] (Fast) button to select “Y.”
Deletion of the song will begin.
If you decide to cancel without deleting, press the [
] (Slow)
button to select “N.”
Once the song is deleted, you’ll be returned to the screen you were
in at step 2.
NOTE
Never turn o the power or disconnect the USB ash drive while
the screen indicates “Working...”
9. Press the [Key Touch] button or the [Transpose] button to
nish the procedure.
Initializing the Memory
(Format Media)
Here’s how you can completely erase all songs that were
saved in the internal memory or the USB ash drive (sold
separately).
NOTE
• Once an initialization is performed, all songs that
have been saved in the internal memory or the USB
ash drive will be erased. The erased data cannot
be recovered, so we recommend that you check the
contents of memory before you proceed.
• If you’re using new USB ash drive (sold separately) with the unit
for the rst time, you’ll need to initialize (format) the USB ash
drive before using it. The unit can’t use USB ash drive that has
not been initialized.
If you want to format USB ash drive, connect the USB ash drive to
the USB memory port (p. 10).
1. While holding down the [Key Touch] button, press the
[Transpose] button.
2. Use the [ ] [ ] (Slow/Fast) buttons to select “Format.”
3. Press the [Song] button.
A screen will appear, allowing you to proceed with the format.
If you decide not to proceed with the format, press the
[Metronome] button.
4. Use the [–] [+] buttons to select the memory that you
want to initialize.
5. Press the [Song] button.
A conrmation message will appear.
6. Press the [ ] (Fast) button to select “Y.”
Formatting of the media will begin.
If you decide not to initialize, press the [
] (Slow) button.
Once the initialization is nished, you’ll be returned to the screen
you were in at step 2.
7. Press the [Key Touch] button or the [Transpose] button to
nish the procedure.
Caution when initializing the memory
• Never turn o the power while “Working...” is shown in the
display.
• If the screen indicates “Error,” please refer to “Error Messages”
(p. 53).
• Initializing the unit’s internal memory will not initialize
settings other than the contents of the internal memory. If
you want to return settings other than the contents of the
internal memory to their factory-set condition, execute the
Factory Reset operation (p. 39).
• Don’t disconnect the USB ash drive until USB ash drive
initialization has been completed.
41
Operation Guide Panel Descriptions Before You Play Performing Practicing
Convenient Functions
Appendix
Function Mode
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DP90Se at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DP90Se in the language / languages: English as an attachment in your email.

The manual is 32,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info