Tone buttons [E. Piano] [Strings] [Other] also operate as buttons that select “Recommended Tones.”
Connecting a commercially-available CD-ROM drive to the USB memory port and selecting a song from a CD-ROM produced for
the VIMA (VIMA TUNES) will automatically cause sounds appropriate for that song to be assigned to the [E. Piano], [Strings], and
[Other] Tone buttons, so that you can select “recommended” sounds by pressing one of these buttons.
p. 14
Eect does not apply
When you are using Dual play or Split play, and dierent eects are specied for the two selected tones, the eect will not be
applied to Tone 2 (when using Dual play) or the left-hand tone (when using Split play).
–
Reverberation remains even if You
defeat the Ambience eect
The unit’s piano sound faithfully simulates the depth and resonance of an acoustic piano, and this may give the impression of
reverberation even if you’ve defeated the Ambience eect.
Also, you may be able to eliminate some reverberation by reducing the value set for “Cabinet Resonance.”
p. 45
The sound of the higher notes
suddenly changes from a certain
key
On an acoustic piano, the approximately one and a half octaves of notes at the top of the keyboard will continue sounding
regardless of the damper pedal. These notes also have a somewhat dierent tonal character. The unit faithfully simulate this
characteristic of acoustic pianos. On the unit, the range that is unaected by the damper pedal will change according to the key
transpose setting.
–
High-pitched ringing is heard
If you hear this in headphones:
Piano sounds that have a brilliant and crisp character contain substantial high-frequency components that may sound as though
a metallic ringing has been added. This is because the character of an actual piano is being faithfully reproduced, and is not a
malfunction.
This sound can be adjusted by modifying the following settings.
• String Resonance (p. 45)
• Ambience (p. 18)
If you don’t hear this in headphones:
It is likely that there is some other reason (such as resonances within the unit). Please contact your dealer or a nearby Roland
service center.
–
Low notes sound wrong, or are
buzzy
If you set the volume to the maximum setting, the sound may be distorted depending on how you perform.
If this occurs, turn down the volume.
–
If you don’t hear this in headphones:
Performing at high volumes may cause the speakers or objects near the unit to resonate. Fluorescent lights or glass doors may
also resonate sympathetically. In particular, this is more likely to occur for lower notes and higher volumes. You can take the
following measures to minimize resonances.
• Locate the speakers 10–15 cm (4–6 inch) away from walls or other surfaces.
• Keep the volume down.
• Move away from the objects that are resonating.
If you hear this in headphones:
It is likely that there is some other reason. Please contact your dealer or a nearby Roland service center.
–
Song does not play correctly
Only the sound of a particular
instrument in a song does not
play
Could a part be muted?
If the button indicator is out, the music on that part is not heard. Press the part button so the indicator is illuminated.
p. 26
Sound is heard from a muted part
Could the part mute volume be set to other than “0”?
If you set this to “0,” the sound of a muted part will be completely inaudible.
p. 27
Song volume is low /
Volume diers between recording
and playback
Could the Song Balance volume be lowered?p. 25
Can’t play back a song saved in
USB ash drive
Could the Audio les of the format be played?
Audio les of the following format can be played back.
• File extension “.WAV”
• 16-bit linear
• “44.1 kHz” sampling rate
p. 25
Is the lename extension “MID”?
Files with other lename extensions cannot be handled as song data.
–
Song tempo becomes unstableWhen playing a song from USB ash drive, the tempo may become unstable if there is an excessive amount of performance data.–
Song name in USB ash drive is
not shown
The song name will not be shown if the song information in the le is empty or consists only of spaces.–
Is the lename extension “MID”?
Files with other lename extensions cannot be handled as song data.
–
Song names can consist only of English letters, numerals, certain symbols, and single-byte characters from the Japanese
syllabary; the unit is unable to correctly display the name if other characters are used.
–
Can’t record / play back
Can’t record SMFHas one of the part buttons for recording been selected?p. 29
Can’t record audioIs a USB ash drive connected to the USB memory port?–
The recorded performance
disappeared
Your recorded performance will disappear if you switch o the unit’s power or select a song.
There is no way to recover the lost performance. Before you turn o the power, save your recorded performance in the internal
memory or the USB ash drive.
–
Limitations regarding audio les
• Ambience will not be applied to audio les (p. 18).
• The Part Mute function cannot be used when playing audio les (p. 26).
• Audio data cannot be saved in the unit’s internal memory. In order to record audio, you must connect a USB ash drive (separately sold) (p. 29, p. 33, p. 34).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roland DP90 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roland DP90 in the language / languages: English as an attachment in your email.
The manual is 33,2 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
