710389

Roland DJ-707M Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
20
Menu Operations
System Settings
1. Press the [MENU] button.
2. Turn the [SELECT (ENTER)] knob to select “System Setting,” and
press the knob.
Sys: PC-B USB<
VENDOR
3. Turn the [SELECT (ENTER)] knob to select the parameter that
you want to edit, and press the knob.
The parameter value blinks.
4. Turn the [SELECT (ENTER)] knob to change the value, and press
the knob.
The value is conrmed.
Parameter Value (Bold: default) / Explanation
PC-B USB
Species the USB driver when using the PC-B port.
VENDOR
Choose this if you want to use a USB driver downloaded from
the Roland website.
GENERIC
Choose this if you want to use the generic USB driver
provided by your computer’s operating system.
* If this is set to GENERIC, you can’t use the unit with
Serato DJ Pro.
* If you are using this with an iOS device, choose GENERIC.
For details, refer to “Using an iOS Device” (p. 22).
X-Fader Mgn
0–10
Species the margin at both ends of the cross fader. Higher
values increase the margin, providing more play at each end
of the cross fader.
Pad Curve
Low, Mid,
High
Species the velocity curve of the performance pads (the
way in which the level changes in response to the strength of
your strike on the pad).
strongweak
low
high
Strength of pad strike
Level
Low Mid Hi
Pad Sens
1–10
Adjusts the sensitivity of the performance pads.
Higher values improve the sensitivity.
JogDialSens
1–8–10
Adjusts the sensitivity for when you take your hand o of
the jog dial.
Higher values improve the response.
Bkspin Len
When applying backspin to the jog dial, this setting lets you make backspin
continue longer than the distance that the jog dial actually rotated.
OFF
Backspin operation occurs according to the actual distance
of rotation.
DEPTH1
Backspin operation occurs longer than the actual distance
of rotation.
The higher the value, the longer backspin is applied.
DEPTH2
DEPTH3
Demo Mode
OFF,
3–5–20 min.
* When a computer is connected, this setting is ignored.
Species the time (minutes) from when the DJ-707M was last
operated until it enters demo mode.
If this is “OFF,” demo mode will not operate.
LED Bright
1–5
Adjusts the brightness when a button, pad, or indicator is lit.
Higher values increase the brightness.
LCD Ctrst
1–5–10 Adjusts the display contrast.
Auto O
DISABLE,
240 min.
When no operation has been performed for a certain length
of time (240 min.), the power turns o automatically.
If you don’t want the power to turn o automatically, set
this “OFF.”
Input Mix
OFF, ON
If this is “ON,” the input signals to INPUT CH 1–4 are output
without change to MASTER OUT when the input select switch
is set to “PC.”
InputChSwap
Species whether the INPUT CH 1 and CH 3 signals are exchanged with the
CH 2 and CH 4 signals when sent to the computer.
NORMAL Don’t swap. The outputs are as printed on the panel.
SWAP Swap the outputs of CH 1 and 3 and CH 2 and 4.
Ctrl surface
OFF, ON
If this is “ON,” the unit operates as a general-purpose MIDI
controller.
DJ-707M Version Indication (Version)
1. Press the [MENU] button.
2. Turn the [SELECT (ENTER)] knob to select “Version,” and press
the knob.
Version:
*.**
Returning to the Factory Settings (Factory Reset)
Here’s how the settings stored in the unit can be reset to their factory-set
values.
1. Press the [MENU] button.
2. Turn the [SELECT (ENTER)] knob to select “Factory Reset,” and
press the knob.
FACTORY RESET:
Target All
3. Turn the [SELECT (ENTER)] knob to select the settings that you
want to reset.
Value Explanation
ALL
All settings stored in the unit
SCENE
Scene settings
SYSTEM
System settings
4. Press the [SELECT (ENTER)] knob.
A conrmation message appears.
Factory Reset?
[Cancel]OK
If you decide to cancel, use the [SELECT (ENTER)] knob to make “CANCEL”
blink, and press the knob.
5. Use the [SELECT (ENTER)] knob to make “OK” blink, and press
the knob.
Factory reset begins.
When the display indicates “Completed. turn o power.,” factory reset is
complete.
NOTE
Never turn o the power until the display indicates “Executing...”
6. Turn the DJ-707M’s power o and then on again.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-707M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-707M in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-707M

Roland DJ-707M User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info