710389

Roland DJ-707M Manual

14
Zoom out
Zoom in
Previous page
1/24
Next page
14
Operating the DJ-707M
4. Hold down a performance pad.
While you hold down the pad, the length that you specied by the
quantize setting is continuously played as a loop.
5. Release the performance pad.
Song playback resumes from the location to which the song had
progressed during loop playback.
Using slicer mode and slicer loop mode
Slicer mode
When the playback location progresses to the end of the region that was
divided into eight, the region on the screen shifts to show the next eight
divisions, and that region divided into eight is assigned to the pads.
1 8765432 1 8765432
Slicer loop mode
When the playback location progresses to the end of the region that was
divided into eight, the playback location returns to the beginning of the
currently-specied region.
1 8765432 1 8765432
Serato Sampler Operations (SAMPLER)
You can use the performance pads to play songs (samples) that are loaded
into Serato Sampler’s sample slots.
1. In Serato DJ Pro, click the [Sampler] key to access the Samples
panel.
2. Press the [SAMPLER] button to make it light in magenta.
Sampler mode is selected.
3. Use the PARAMETER [−] [+] buttons to switch the Serato
Sampler’s banks.
The Serato Sampler has four banks (A–D), and each bank has eight slots.
4. Drag and drop songs into the Sampler panel to load a sample
into each slot of the Sampler panel.
The sampler settings and the loaded samples are saved.
* You can also load a sample by using the [SELECT (ENTER)] knob to
select a sample and then pressing a performance pad while holding
down the [SHIFT] button.
5. Press a performance pad.
The sample of the slot that’s assigned to the pad you pressed is played.
Slot 1 Slot 2 Slot 3 Slot 4
Slot 5 Slot 6 Slot 7 Slot 8
* The type of playback changes depending Serato Sampler’s playback
mode. For details, refer to the Serato DJ Pro user manual.
MEMO
If you hold down the [SHIFT] button and press the performance pad,
sample playback stops.
Pitch Play Operations (PITCH PLAY)
The pitch of the loaded song can be changed in semitone steps.
NOTE
In order to use Pitch Play mode, you must separately purchase the Pitch’n
time DJ and activate Pitch’n time DJ.
1. Hold down the [SHIFT] button and press the [SAMPLER] button
to make the button light in turquoise.
Pitch play mode is selected.
2. Press a performance pad to change the pitch.
No change
Semitone
down
Pitch is raised in semitone steps
Pitch is lowered in semitone steps
5 By using the PARAMETER [−] [+] buttons you can change the range of
pitch change.
Velocity Sampler Operations
The functionality is the same as in sampler mode, but when you press a
pad, the sample’s playback volume changes depending on how strongly
you press the pad.
1. Press the [SAMPLER] button twice to make the button light in
purple.
Velocity sampler mode is selected.
2. Press a performance pad.
The sample of the slot assigned to the pad you press is played.
The more strongly you press the pad, the louder the sample’s playback
volume.
Saved Flip Operations
By pressing a performance pad you can play back a saved Flip.
NOTE
In order to use Saved Flip mode, you must separately purchase the Serato
Flip Expansion Pack and activate Serato Flip.
1. Press the [HOT CUE] button twice to make the button light in
orange.
Saved Flip mode is selected.
2. Press a lit performance pad.
The Flip that is in the Flip slot corresponding to the pad you pressed starts
playing.
Slot 1 Slot 2 Slot 3 Slot 4
Slot 5 Slot 6 Slot 7 Slot 8
5 If you hold down the [SHIFT] button and press a lit performance pad, the
Flip that is in the corresponding Flip slot is recalled, but you won’t move
to the beginning of the Flip. In this case, the Flip plays when the song
playback position reaches the beginning of the ip.
Song Analysis
Song analysis begins when you press the DJ-707M’s [SELECT] knob to load
a song into a deck, but if you’re using Serato DJ Pro as an oine player (i.e.,
without the DJ-707M being connected), you can analyze songs ahead of
time.
If analysis is nished for a song, the BPM and waveform are displayed
immediately after you load that song into a deck.
For details on how to analyze songs with the oine player, refer to the
Serato DJ Pro user manual.
* Depending on the number of songs, analysis might take some time.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-707M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-707M in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-707M

Roland DJ-707M User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info