710369

Roland DJ-202 Manual

11
Zoom out
Zoom in
Previous page
1/17
Next page
11
Operating the DJ-202
Performance Pad Operations
Hot Cue Operations (HOT CUE)
In hot cue mode, you can assign hot cues to performance pads 1–4 and
manual loops to performance pads 5–8.
1 2 3 4
5 6 7 8
Hot cue
Manual loop
Assigning hot cues
By specifying a hot cue, you can instantly play back from the specied
location.
You can specify up to four hot cues for each song.
1. Press the [HOT CUE] button to make the button light.
2. During playback or while paused, press a performance pad 1–4
that is unlit.
A hot cue is assigned to the performance pad that you pressed.
Hot cues (1–4) are assigned to the performance pads as follows.
HOT CUE
1
HOT CUE
2
HOT CUE
3
HOT CUE
4
3. Press a performance pad that is lit (i.e., a pad to which a hot cue
is assigned).
Playback starts from the specied location.
MEMO
If you hold down the [SHIFT] button and press a performance pad, the
hot cue of the pad you pressed is cleared.
Assigning manual loops
1. Press the [HOT CUE] button to make the button light.
2. During playback, press performance pad 5 to specify the loop
IN point.
Loop
IN
Loop
OUT
Loop
EXIT
Loop
ON/OFF
3. During playback, press performance pad 6 to specify the loop
OUT point.
Loop playback begins between the loop IN point and the loop OUT point.
4. To exit manual loop, press performance pad 7 during loop
playback.
After exiting manual loop, if you press performance pad 7 during
playback, you return to the previously-specied loop IN point and loop
playback starts.
5. To cancel manual loop, press performance pad 8.
If you press performance pad 8 after canceling manual loop, manual loop
is re-specied.
Adjusting the length of manual loop
5 During playback, you can press performance pad 5 and then use the
jog dial to make ne adjustments to the loop IN point. If you once
again press performance pad 5, you’ll return to loop playback.
5 During playback, you can press performance pad 6 and then use the
jog dial to make ne adjustments to the loop OUT point. If you once
again press performance pad 6, you’ll return to loop playback.
Loop Operations (LOOP)
In loop mode, you can assign loops to performance pads 1–4 and manual
loops to performance pads 5–8.
1 2 3 4
5 6 7 8
Loop
Manual loop
Assigning loops
You can specify a loop of 1, 2, 4, or 8 beats relative to the BPM of the song.
1. Press the [LOOP] button to make the button light.
2. During playback, press a performance pad 1–4 to turn loop on.
The beats of the loop are assigned to the performance pads as follows.
1 beat 2 beats 4 beats 8 beats
3. To turn o the loop, press the same performance pad once
again.
Assigning manual loops
The operation is the same as for manual loop of hot cue mode.
Sequencer Operations (SEQUENCER)
Using the sequencer, “patterns” created using drum sounds (instruments) of
a Roland TR-909, TR-808, TR-707, or TR-606 rhythm machine, or samples of
Serato Sampler, can be edited in either step or realtime recording.
* For details on sequencer operation, refer to “Using the Sequencer”
(p. 13).
Pattern Operations (PATTERN)
In pattern mode, you can play back patterns (1–16) that you select by
pressing a performance pad.
* For details on selecting and playing back patterns, refer to “Using the
Sequencer” (p. 13).
INST PLAY Operations
In INST PLAY mode, you can press performance pads to play instruments
(p. 13).
1. Hold down the [SHIFT] button and press the [SEQUENCER]
button twice to access INST PLAY mode.
In INST PLAY mode, the button blinks at high speed.
The following instruments are assigned to the performance pads.
BD SD CH OH
LT HC RS RC
2. Press a performance pad.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DJ-202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DJ-202 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DJ-202

Roland DJ-202 User Manual - German - 17 pages

Roland DJ-202 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info