527995
6
Zoom out
Zoom in
Previous page
1/17
Next page
6
Panel descriptions
Front Panel
ADAT indicator
This indicator will light green if an ADAT
interface signal is being input to the ADAT
digital IN connector.
POWER indicator
When the R-BUS device connected to the R-BUS
connector is powered up, this indicator will light
red to indicate that power is being supplied to
the DIF-AT24.
* Power is supplied to the DIF-AT24 via the R-BUS
connector.
MIDI IN/OUT connectors
These are used mainly for MTC synchronization.
The data that is transmitted from the MIDI OUT connector
will depend on the settings of the R-BUS device connected to
the R-BUS connector.
Rear Panel
MASTER CLK (Master clock) switch
This switches the master clock (sampling clock)
synchronization.
ADAT OUT/IN (ADAT digital out/in)
connector
This is the ADAT digital interface.
It allows eight channels of digital audio data to
be transferred between the DIF-AT24 and an
ADAT-compatible digital device.
R-BUS connector
Provides for the input/output of eight channels
of digital audio data, thus allowing the exchange
of data between the DIF-AT24 and an R-BUS
device to take place. Also transmits/receives
synchronization signals.
* Power is supplied to the DIF-AT24 via the R-BUS
connector.
Connect only an R-BUS device to the R-BUS connector.
You must never connect a device with a SCSI, RS-232C,
or parallel interface. Even though the connectors on such
devices may look similar, they are incompatible, and
damage and/or malfunction could result if you attempt
their connection. Also, you must use only a special R-BUS
cable to make connections.
You must turn off the power of the R-BUS device before
connecting or disconnecting the R-BUS cable. If you
connect or disconnect the cable while power is being
supplied, the external R-BUS device will stop working
correctly, and the DIF-AT24 or the external R-BUS device
may also be damaged.
The specifications for “R-BUS” are identical to those of
RMDB2 and RMDB II. You can use it with any device
that is marked “RMDB2” or “RMDB II.”
R-BUS (RMDB2) is not compatible with the older RMDB
specification.
MASTER CLK
switch
Master clock device
Set to [R-BUS]
When using the R-BUS device
connected to the R-BUS
connector as the master clock.
Set to [ADAT]
When using the digital device
connected to the ADAT OUT/IN
connector as the master clock
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DIF-AT24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DIF-AT24 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DIF-AT24

Roland DIF-AT24 User Manual - German - 16 pages

Roland DIF-AT24 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info