710341

Roland DB-900 Manual

12
Zoom out
Zoom in
Previous page
1/20
Next page
12
The Memory Function
Calling Up Memory
1. Press the MEMORY A or MEMORY B button to choose
the memory you want.
fig.004*
• You can also choose a memory using the foot switch.
When doing so, however, be aware that the MEMORY
buttons do not function.
• For more on the factory-default settings for memory A
and memory B, see “Factory-default Settings” (p. 14).
Changing the Settings for
Memory A and Memory B (Edit)
1. Press the MEMORY A or MEMORY B button to choose
the memory whose settings you want to change.
fig.004*
You can also choose a memory using the foot switch.
When doing so, however, be aware that the MEMORY
buttons do not function.
2. Operate the controls.
When a knob setting is changed, the selected MEMORY
button flashes.
fig.005
When operating the controls, note that editing mode is
actually entered after you’ve hit the same setting as the
one in memory. This means it’s a good idea to give the
control knob a big turn through all the possible settings,
then bring it back to the setting you want.
NOTE
If the MANUAL button or a MEMORY button is pressed at
this point, or the power is switched off, any changes you've
made in the settings will be discarded.
If you want to save the changes you've made, be sure to carry
out the Write procedure.
Storing the Panel Settings in
Memory A and Memory B (Write)
You can store the settings for all controls except the MASTER
knob in memory A or memory B.
1. When you’re done making the settings with the
controls, press the WRITE button.
fig.006
2. Press the MEMORY A or MEMORY B button to choose
memory A or memory B.
fig.004
• You can also choose a memory using the foot switch.
When doing so, however, be aware that the MEMORY
buttons do not function.
• To cancel the Write procedure, press the MANUAL
button. The Write procedure is then cancelled, and the
DB-900 switches to Manual mode.
3. Press the WRITE button to write (store) the settings to
memory.
The indicator flashes while writing is in progress, and
remains steadily lit when it ends.
fig.007
If it is necessary to adjust the volume-level balance
between memory A and memory B, adjust the VOLUME
knob on the amplifier, and then store the settings.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DB-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DB-900 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DB-900

Roland DB-900 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info