710341
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
Button Names and Functions
6. D-Chorus
Thanks to dynamic band-splitting processing according to
input signals, you can perform with a chorus effect with no
loss in bass-range response.
INTENSITY
Knob
This adjusts the amount of chorus thats applied. When you
dont want to use a chorus effect, set this to Off (the
indicator goes dark). If you want to obtain a longer pre-delay
effect, set this to a value of 7 or more.
You can use a foot switch to toggle the chorus
effect on and off. Note that this is not possible
when the
INTENSITY
knob is off.
7. Master
POWER INJECTION
Indicator
This indicator shows the power-boosting effect of DSP. The
color of the indicator changes from green to orange
according to the effect.
This indicator only applies to the speaker output.
MASTER
Knob
This adjusts the volume level of the units speaker or the
headphones.
The setting of the
MASTER
knob is not stored in
memory A or memory B.
PHONES
Jack
This is for connecting headphones. Tonal correction is
performed in order to produce the optimal headphones
sound.
When headphones are connected, no sound is output to
the unit’s speaker.
Output to the headphones is monaural.
Before plugging in or unplugging headphones, be sure
to adjust the
MASTER
knob to 0.
POWER
Switch
This switches the power on and off. The pilot light
illuminates when the power is on.
Before turning the power on or off, be sure to put the
MASTER
knob at 0.
Rear panel
fig. 2 (rear panel)
8. Balanced DI
Balanced DI
Connector
This is an XLR-type, superior sound quality, balanced DI
connector for output of the direct sound of the bass guitar.
GND LIFT
Switch
This selects whether the balanced DI connector and the XLR-
type Line Out jack are grounded or not. If hum occurs, try
changing a switch position
9. Insert
These jacks are for connecting external effects and the like.
SEND
Jack
This is the output jack that connects to the input on the
external effects unit.
RETURN
Jack
This jack is for input of the returned sound from the external
effects unit.
10. Line Out
These output preamp sound including D-chorus. There are
two types of connectors: an XLR type and a balanced TRS 1/
4 phone jack. Use the appropriate one for the equipment
youre connecting.
NOTE
NOTE
NOTE
NOTE
NOTE
8
9
10
11
1: GND (earth)
2: HOT
3: COLD
1
2
3
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland DB-900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland DB-900 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland DB-900

Roland DB-900 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info