Manual Roland D-Bass 210 (page 12 of 24) (English)

710347

Zoom out

Zoom in

1/24

Panel descriptions

* Regardless of the knob position, the effects are bypassed when

nothing is connected to the EFFECT RETURN jack.

* With a series connection, no sound is output from the D-

BASS when the volume of the external effects processor is

turned down completely or the effects processor’s power is

turned off.

• Series-Connected Effects

Effects that change the source sound itself

Ex.) Equalizer, Limiter, Distortion, Wah, Chorus, Flanger

• Parallel-Connected Effects

Effects sounds added to the dry sound

Ex.) Delay, Reverb

When using parallel-connected effects, set the external

effects processor so that the source sound (the dry

sound) is cut, with only the effect sound being output.

This prevents the direct sound from passing through the

external effects processor, serving to minimize any tonal

variation.This is additionally convenient as it allows you

to adjust the depth of the effect from the D-BASS’s front

panel, which is closer at hand.

* Certain devices may not allow the source sound (dry sound) to

be cut. In such cases, use a series connection.

15.

VOLUME Knob

This adjusts the volume level of the D-BASS speakers or

headphones. This also works on the volume for the SUB

OUT jack (p. 13).

* The VOLUME knob does not affect the LINE OUT,

BALANCED OUT, and TUNER OUT.

16.

MUTE Switch

This switches the Mute function on and off.

When muting is turned on, the indicator flashes, and the

output from the speakers, the BALANCED OUT, LINE

OUT, SUB OUT, and PHONES is muted.

With the mute function activated, you do not need to

turn down the VOLUME knob to mute the noise when

plugging into, or unplugging from your bass guitar.

* Sounds from the TUNER OUT jack is not muted.

By connecting a tuner (optional) to TUNER OUT and

then MUTE switch is turned on, you can tune your

instrument without the sound being output from the

speakers.

You can use a foot switch (the optional BOSS FS-5L) to

switch muting on and off. (p. 13)

17.

PHONES Jack

Headphones are connected here. No sounds are output

from the speakers and SUB OUT jack (p. 13) when

headphones are connected.

18.

POWER Switch

Turns the power on and off. The indicator lights up

when the power is on.

* If you need to turn off the power completely, first turn off the

POWER switch, then unplug the power cord from the power

outlet. Refer to “Power Supply” (p. 7).

* Once the connections have been completed, turn on power to

your various devices in the order specified. By turning on

devices in the wrong order, you risk causing malfunction and/

or damage to speakers and other devices.

1. Switch on the equipment connected to the D-BASS

210/115’s EFFECT SEND/RETURN jacks.

2. Turn on the D-BASS 210/115.

3. Switch on any equipment connected to the D-BASS

210/115’s OUTPUT jacks.

Turn off the devices in the reverse order to which they

were switched on.

* This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will

operate normally.

* Always make sure to have the volume level turned down before

switching on power. Even with the volume all the way down,

you may still hear some sound when the power is switched on,

but this is normal, and does not indicate a malfunction.

Knob

Settings

Connection

Status

Mix Balance

Effect

Bypass

Only the direct sound is output.

No effect is applied.

Parallel

Connection

Adjust the knob as you listen to

check the balance of the mix be-

tween the direct and effect

sounds.

With the knob at center position,

100% of the direct sound and

100% of the effect sound are out-

put.

Turn the knob to the left to re-

duce the effect sound; turn to the

right to reduce the direct sound.

Series

Connection

Only the effect sound is output.

210/115

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-Bass 210 in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-Bass 210

Roland D-Bass 210 User Manual - German - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland D-Bass 210 Manual

Product: