710345
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
Panel descriptions
D-BASS 210/115 Rear Panel
fig.01-02
1. FOOT SW Jack
You can connect a latch-type switch (optional BOSS FS-
5L) and use the switch to turn the Mute function on and
off.
* Set the foot switch Polarity setting as shown below.
fig.01-03
When you have a foot switch connected, the mute
function can be switched on with either the MUTE
switch (p. 12) on the front panel or the foot switch.
Switching either one to ON turns on the mute function.
To turn muting off, set both the MUTE switch and the
foot switch to OFF.
2. SUB OUT Jack
Use this to connect the D-BASS 210/115 with the 115X.
Connect this jack to the 115X INPUT jack.
* The volume level for this output is adjusted with the
VOLUME knob. Thus, you can also control the volume of the
115X with the D-BASS 210/115 VOLUME knob.
In this case, the volume balance between the D-BASS 210/115
and the 115X does not change.
3. LINE OUT Jack
You can connect a mixer, recorder, or other such device
here.
The output level is +4 dBu.
* The VOLUME knob has no effect on the signal from LINE
OUT. Adjust the volume on the connected device.
4. EFFECT Jacks
Use this to connect external effects processors and other
such devices.
The input/output level is +4 dBu.
SEND Jack:
Connect this jack to the external effects processor’s input
jack.
RETURN jack:
Connect this jack to the external effects processor’s
output jack.
* When connecting external effects processors, adjust the
EFFECT BLEND knob (p. 11) so it’s at an appropriate setting.
Turning the knob completely to the left puts the D-BASS into
effect bypass mode, so no effect sound is output.
1 2 3 5 6
4
PA Mixer
Tuner
Recorder
INPUT
INPUTINPUTOUTPUT
INPUT
INPUT
FS-5L
The pin assignment for the XLR type connectors
is as shown below.
Before making any connections, make sure that
this pin assignment is compatible with that of all
your other devices.
External Effects
D-BASS 115X
Q: The volume level of the instrument connected to the D-BASS
210/115 is too low.
A: Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
Polarity Switch
210/115
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-Bass 115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-Bass 115 in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-Bass 115

Roland D-Bass 115 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info