527871
102
Zoom out
Zoom in
Previous page
1/116
Next page
102
MIDI Implementation
Omni Off (Controller number 124)
status 2nd byte 3rd byte
BnH 7CH 00H
* The same processing will be done as when an All Note Off message is received.
Omni On (Controller number 125)
status 2nd byte 3rd byte
BnH 7DH 00H
* The same processing will be done as when an All Note Off message is received.
Mono (Controller number 126)
status 2nd byte 3rd byte
BnH 7EH mmH
mm=mono number: 00H10H (016)
* The same processing will be done as when an All Note Off message is received.
Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
* The same processing will be done as when an All Note Off message is received.
System Exclusive messages
status data byte status
F0H iiH, ddH, ......, eeH F7H
F0H: System Exclusive message status
ii = ID number: This is the ID number (manufacturer ID) that specifies the
manufacturer whose exclusive message this is. Rolands manufacturer
ID is 41H.ID numbers 7EH and 7FH are defined in an expansion of the
MIDI standard as Universal Non-realtime messages (7EH) and
Universal Realtime Messages (7FH).
dd,..., ee = data: 00H7FH (0127)
F7H: EOX (End Of Exclusive)
3.2 Messages not recorded during recording
Channel Mode messages
Local On/Off (Controller number 122)
status 2nd byte 3rd byte
BnH 7AH 00H
vv=value: 00H,7FH (Local off, Local on)
All Note Off (Controller number 123)
status 2nd byte 3rd byte
BnH 7BH 00H
* When an All Note Off message is received, all notes of the corresponding channel that
are on will be sent Note Offs, and the resulting Note Off messages will be recorded.
3.3 Messages acknowledged for synchronization
System Common messages
Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00H7F 7FH (016383)
System Realtime messages
Timing Clock
status
F8H
* This message will be received if the Sync Mode parameter is SLAVE.
Start
status
FAH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
Continue
status
FBH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
Stop
status
FCH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
4. Data transmission (Sequencer section)
4.1 Recorded messages are transmitted during
playback.
4.2 If the Through parameter is ON, messages
received (except for System Common messages
and System Realtime messages) will be
transmitted.
4.3 Messages that are generated and transmitted
4.3.1 Messages automatically generated by the system
Channel Mode messages
Omni Off (Controller number 124)
status 2nd byte 3rd byte
BnH 7CH 00H
* At start-up, this message is transmitted to all channels.
Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
* At start-up, this message is transmitted to all channels.
4.3.2 Messages generated and transmitted when the
Sync Out is ON
System Common messages
Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00H7F 7FH (016383)
* This message is transmitted if the Sync out is ON. It is not transmitted when the D-
FIELD is set to VINYL.
System Realtime messages
Timing Clock
status
F8H
* This message is transmitted if the Sync out is ON. It is not transmitted when the D-
FIELD is set to VINYL.
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info