527871
98
Zoom out
Zoom in
Previous page
1/116
Next page
98
MIDI Implementation
Model: D2 (groovebox)
Date: Mar. 12, 2001
Version: 1.00
Symbol Description Range
n MIDI Channel 0H6H,9H (ch.1ch.7,ch.10)
vv Control value 00H7FH (0127)
kk Note Number 00H7FH (0127)
xx ON/OFF 00H3FH (063:OFF), 40H7FH (64127:ON)
1. Data reception (sound source section)
Channel voice messages
Note Off
status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
vv=Note Off velocity: 00H - 7FH (0 - 127)
Note On
status 2nd byte 3rd byte
9nH kkH vvH
vv=Note On velocity: 01H - 7FH (1 - 127)
Polyphonic Aftertouch
status 2nd byte 3rd byte
AnH kkH vvH
vv=Polyphonic Aftertouch: 00 00H - 7FH (0 - 127)
Control Change
* Not received when the Rx Switch parameter is OFF.
Bank Select (Controller number 0,32)
status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
mm,ll=Bank number: 00 00H7F 7FH (bank.1bank.16384)
* Not received when the Rx Program Change Switch or Rx Bank Select Switch parameter
is OFF.
* The Patches corresponding to each Bank Select are as follows.
Bank Select | Program No | Group Patch No.
MSB | LSB | |
——————+—————+————————————+————————————————————————————————————————
81 | 0 | 001 - 128 | Preset A 001 - 128
81 | 1 | 001 - 128 | Preset B 001 - 128
81 | 2 | 001 - 128 | Preset C 001 - 128
81 | 3 | 001 - 128 | Preset D 001 - 128
84 | 0 | 001 - 088 | Preset E 001 - 088
85 | 0 | 001 - 128 | User 001 - 128
85 | 1 | 001 - 128 | User 129 - 256
* The Rhythm set corresponding to each Bank Select are as follows.
Bank Select | Program No | Group Patch No.
MSB | LSB | |
——————+—————+————————————+————————————————————————————————————————
81 | 0 | 1 - 26 | Preset A 01 - 26
84 | 0 | 1 - 4 | Preset B 01 - 04
85 | 0 | 1 - 20 | User 01 - 20
Modulation (Controller number 1)
status 2nd byte 3rd byte
BnH 01H vvH
* The effect will apply according to the Modulation Control setting.
Data Entry (Controller number 6,38)
status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
mm,ll= the value of the parameter specified by RPNmm=MSB, ll=LSB
Expression (Controller number 11)
status 2nd byte 3rd byte
BnH 0BH vvH
* Expression messages are used to adjust the volume of each part.
Hold 1 (Controller number 64)
status 2nd byte 3rd byte
BnH 40H xxH
Sostenuto (Controller number 66)
status 2nd byte 3rd byte
BnH 42H xxH
Soft (Controller number 67)
status 2nd byte 3rd byte
BnH 43H xxH
Hold 2 (Controller number 69)
status 2nd byte 3rd byte
BnH 45H xxH
Portamento Control (Controller number 84)
status 2nd byte 3rd byte
BnH 54H kkH
* A Note On message received immediately after a Portamento control will be sounded
with the pitch changing smoothly from the source note number. If a voice is already
sounding at the same note number as the source note number, that voice will change
pitch to the pitch of the newly received Note On, and continue sounding (i.e., will be
played legato).
* The speed of the pitch change caused by Portamento is determined by the Portamento
Time parameter.
RPN MSB/LSB (Controller number 100,101)
status 2nd byte 3rd byte
BnH 65H mmH
BnH 64H llH
mm=MSB of the parameter number specified by RPN
ll=LSB of the parameter number specified by RPN
<< RPN >>
Control Changes include RPN (Registered Parameter Numbers), which are extended
parameters whose function is defined in the MIDI specification.
When using RPNs, first the RPN (Controller numbers 100 and 101; they can be sent in any
order) is transmitted to specify the parameter you wish to control. Then, Data Entry
messages (Controller numbers 6 and 38) are used to set the value of the specified parameter.
Once a RPN parameter has been specified, all further Data Entry messages on that channel
are considered to apply to that specified parameter. In order to prevent accidents, when the
desired setting has been made for the parameter, it is recommended that RPN be set to Null.
This device receives the following RPNs.
RPN Data entry
MSB LSB MSB LSB Notes
00H 00H mmH Pitch Bend Sensitivity
mm : 00H0CH (012 semitones)
ll : ignored (processed as 00H)
Up to 1 octave can be specified in semitone steps.
*The Bend Range up parameter, Bend Range Down parameter will
also be changed.
*Not received by the Part R.
00H 01H mmH llH Master Fine Tuning
mm, ll: 20 00H40 00H60 00H ( -4096 x 100 / 81920+4096 x 100 /
8192 cent )
*The Fine Tune parameter of each Part will change.
00H 02H mmH Master Coarse Tuning
mm : 10H40H70H (-480+48 semitones)
ll : ignored (processed as 00H)
*The Key Shift parameter of each Part will change.
7FH 7FH RPN null
RPN will be set as unspecified. Once this setting has been made,
subsequent Data Entry messages will be ignored. (It is not necessary to
transmit Data Entry for RPN Null settings.) Parameter values that
were previously set will not change.
mm, ll: ignored
*
For the functions of other controller numbers, refer to
Table of Transmitted Data (p. 76).
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info