527871
77
Zoom out
Zoom in
Previous page
1/116
Next page
77
Chapter 8. System Settings and MIDI Applications
Chapter 8
MIDI reception settings
Indication Parameter Explanation Values
AUTO
CHANNEL
Determines how MIDI messages will be received from ex-
ternal MIDI devices.
* At the factory settings this is set to “OFF.”
* Set this “OFF” if you want note messages of the channel
specified as the Arpeggio Control Channel or RPS Control
Channel to control arpeggios or RPS from an external
device.
OFF:
The patches of each part can be
played independently according
to the channel of the MIDI data
transmitted from an external
MIDI device.
ON:
The patch of the part selected on
the D2 can be played, regardless
of the transmit channel of the ex-
ternal MIDI device.
ARPEGGIO
CTRL CH
(arpeggio
control chan-
nel)
Specifies the channel on which note messages from an exter-
nal MIDI device will control arpeggios when Auto Channel
is OFF. When note messages of the specified channel are
received from an external MIDI device, an arpeggio can be
generated according to that note data, and will sound the
current part. At the factory settings this is set to 16.
* This setting is ignored if Auto Channel is “ON.”
OFF, 116
RPS CTRL
CH
(RPS control
channel)
Specifies the channel on which note messages from an exter-
nal MIDI device will control RPS when Auto CHANNEL is
OFF. RPS can be played by receiving note messages on the
specified channel. At the factory settings this is set to 15.
* This setting is ignored if Auto Channel is “ON.”
OFF, 116
RX SYSEX
(receive sys-
tem exclu-
sive)
Determines whether the D2 will receive system exclusive
messages. When this setting is OFF, system exclusive
messages will not be received.
OFF, ON
SOFT THRU If this is ON, MIDI messages received at the MIDI IN con-
nector will be re-transmitted without change from the MIDI
OUT connector.
OFF, ON
DEVICE ID
(device ID
number)
This setting is necessary only if data is being transmitted
separately to two or more D2 units. Otherwise, you should
not change this setting. At the factory settings, the device ID
number is set to 17.
* If you forget the device ID that was used when bulk data
was saved on an external device, it will no longer be possible
to receive the saved bulk data.
1732
RX BULK
(bulk receive)
Data that was saved on an external device can be sent back
to the D2.
For details refer to p. 81.
OFF:
Data will not be received.
PTN:
Data of the current pattern will
be received.
ALL:
All data will be received.
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info