527871
26
Zoom out
Zoom in
Previous page
1/116
Next page
26
Chapter 3. About the D-FIELD
Playing arpeggios (ASSIGN 1: ARPEGGIATOR 1)
fig.AP1
You can specify ahead of time how the arpeggio will be sounded; then change the root note by varying the left/right location at
which you press the D-FIELD, and change the chord by moving up/down.
Making detailed settings
1. Hold down [ASSIGN 1] and press [EDIT].
2. Press [ENTER] to select the desired parameter.
3. Turn [VALUE] to modify the setting.
When you have created an arpeggio that you like, save it as a user
style.
4. Press [WRITE].
A screen will appear in which you can specify the save destination
for the arpeggio style.
5. Turn [VALUE] to select the save destination arpeggio style.
6. Press [ENTER].
The display will ask SurE (are you sure you want to save?).
7. If you wish to save, press [ENTER].
* If you decide not to save, press [EXIT].
Display Explanation Setting
TYPE none none none
X none Root note Root note (fixed)
Y none Chord Chord (fixed)
Display Parameter Explanation Setting
STYLE Select how the sound will be played. Refer to Arpeggio set-
tings (p. 28).
* Arpeggio settings are
common to Adlib and
Arpeggiator 1 and 2.
MOTIF Specify the order in which the component notes of the chord
will sound.
BEAT PATTERN Specify the pattern of accent locations and note lengths.
SHUFFLE RATE You can vary the timing of the backbeats to create shuffle
rhythms. With a setting of 50%, the notes will be spaced
equally. As this value is increased, the notes will be played
with a more dotted feel.
* When the Beat Pattern setting is 1/4, no “shuffle” feel will
be applied even if you increase the Shuffle Rate.
5090(%)
ACCENT RATE You can add expression to the arpeggio by varying the
strength and note length of the accented notes. Increasing
this value will produce a greater sense of groove.
0100
OCTAVE RANGE Specify the pitch range of the arpeggio in octave units. Low-
ering this value below 0 will cause the arpeggio to be played
in a pitch range below the chord you specified.
-33
OCTAVE SHIFT Raise or lower the pitch that is sounded, in units of an oc-
tave.
-33
If you switch to another style without saving the
edited arpeggio settings in a user style, your
settings will be lost.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info