527871
11
Zoom out
Zoom in
Previous page
1/116
Next page
11
Panel Descriptions/ Making Connections
Rear panel
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices
before making any connections.
1. POWER switch
This turns the power on/off.
2. AC adaptor jack
Connect the supplied AC adaptor to this jack.
* To prevent the inadvertent disruption of power to your unit
(should the plug be pulled out accidentally), and to avoid
applying undue stress to the AC adaptor jack, anchor the
power cord using the cord hook, as shown in the illustration.
3. MIDI connectors (IN, OUT)
These connectors are used when you want to use the D2
to play external sound generating devices, or use an
external sequencer to play the D2s sound generator; or
when you want to save or load D2 settings.
* For details concerning MIDI devices, refer to Chapter 8.
System Settings and MIDI Applications (p. 73).
4. OUTPUT jacks (L, R)
Connect these jacks to your mixer or amp.
5. Headphone jack
This jack accepts connection of a set of stereo
headphones. Sound will still be output from the
OUTPUT jacks even while headphones are connected.
6. Security Slot ( )
http://www.kensington.com/
Turning On/Off the Power
* Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/
or damage to speakers and other devices.
1. Make sure that all volume controls on the D2 and
connected devices are set to 0.
2. Turn on the D2s [POWER] switch.
3. Turn on the device connected to the OUTPUT Jacks.
4. Adjust the volume levels for the devices.
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
Turning off the power
Before switching off the power, lower the volume on each of
the devices in your system and then TURN OFF the devices
in the reverse order to which they were switched on.
To Mixer, Amplifier
Cord hook
AC Adaptor
1 23 456
Stereo Headphones
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland D-2 GROOVEBOX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland D-2 GROOVEBOX in the language / languages: English as an attachment in your email.

The manual is 4,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland D-2 GROOVEBOX

Roland D-2 GROOVEBOX User Manual - German - 115 pages

Roland D-2 GROOVEBOX User Manual - Dutch - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info