710329

Roland CY-6 Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page
4
CY-6
Features
• Velocity sensitive cymbal pad provides rich
expression.
• Designed specially for cymbals, the pad offers
superior playing feel. Even the movement caused by
playing is simulated.
• You can use bow shots, edge shots, and choking
techniques.
• Compatible with all Roland percussion sound
modules (p. 7).
Making the Settings
Attaching the Cymbal Pad to a Stand
Attach the CY-6 to a separately sold cymbal mount (MDY
series).
1. Use a commercially available tuning key to
tighten the stopper bolt.
The stopper keeps the cymbal pad from turning, and
prevents the cables from catching or getting tangled on the
stand.
2. Attach the CY-6 so the unit is oriented as
shown in the diagram.
3. Tighten the wing nut to obtain the desired
movement.
Use the included felt washer and the wing nut.
Connecting to a Percussion Sound
Module (TD-6, TD-8, TD-10, etc.)
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
1. Use the included connection cable and connect
the output jack of the CY-6 to the trigger input
jack of the percussion sound module.
Connect the L-shaped plug of the included cable to the
CY-6. This will prevent strain from being applied to the
CY-6.
To make use of edge shot and choking play techniques,
you'll need to connect to a trigger input jack on the
percussion sound module that accommodates rim shots.
2. Make the trigger settings for the percussion
sound module. For the recommended values,
refer to p. 7.
Should you neglect to make the appropriate settings for
the percussion sound module, you could likely experience
the following problems:
• Sometimes it does not sound (uneven volume)
• The volume is too low (reduced sensitivity)
For information on how to change the parameters for a
percussion sound module, refer to the documentation for
the percussion sound module you're using.
Stopper
(Be sure to
orient it correctly)
Tighten the bolt with
the included tuning key.
Wing Nut
Felt Washer
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CY-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CY-6 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CY-6

Roland CY-6 User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info