527794
18
Zoom out
Zoom in
Previous page
1/176
Next page
16
Using the SOLO Function
You can save and call up the panel settings (those enclosed by
the line in the figure) for sounds you create with the LEAD
channel. On this unit, this function is called “SOLO.”
By default, “Loud Metal” (p. 20) sample settings are saved in the
SOLO function.
* The VOLUME setting for the LEAD channel is not saved.
* The LOOPER settings and the recorded phrase are not saved.
1. Create a sound with the LEAD channel.
2. Set the SOLO volume at 0 (zero).
If the SOLO volume is set
high, the sound may be
unexpectedly loud when the
panel settings are saved.
Before saving, lower the
volume to 0.
3. Press and hold the SOLO switch on the panel
until the indicator starts to flash
(approximately 2 seconds or longer).
When the panel settings are
saved, the indicator
changes to a steadily
lighted state.
* Never switch off the power
while the indicator is flashing.
4. Adjust the volume for the SOLO function.
* Saved panel settings remain in memory even after the power is
turned off.
1. While at the JC CLEAN or LEAD channel, press
the SOLO switch on the panel.
The SOLO indicator lights up and the panel settings stored
in memory are called up.
* When no panel settings have been saved, or when you’re using the unit
for the first time, the product’s factory-default settings (
“Loud Metal” (p.
20) sample settings) are called up.
1. Press the SOLO switch on the panel to call up
the saved settings.
2. Turn the panel knob for the item you want to
change, and modify the setting.
* The SOLO indicator goes out briefly when the position of the
turned knob coincides with the position stored in memory.
3. Pressing the SOLO switch on the panel until
the indicator starts to flash (approximately 2
seconds or longer) saves the changes to the
settings.
* Never switch off the power while the indicator is flashing.
* Once the new settings have been saved, the previous settings in
effect before the changes cannot be called up again.
* To quit without saving the changes, press the SOLO switch or the
SELECT switch.
You can switch channels using the SELECT switch and the SOLO
switch.
* When a momentary-type footswitch pedal is connected, it also
performs the same operation.
Saving the Panel Settings
Calling Up Panel Settings
Changing or Checking Saved Panel
Settings
Switching the SOLO Function and the
LEAD and JC CLEAN Channels
SELECT
switch
SOLO
switch
SOLO switch
SELECT switch
Returning to the Factory-default Settings
Hold down the TAP switch and the SOLO switch at the same
time and switch on the power.
The SOLO indicator flashes and the settings saved with the
SOLO function are returned to their factory defaults.
cube-80x.book 16 ページ 2008年12月12日 金曜日 午後6時7分
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CUBE-80X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CUBE-80X in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 30,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CUBE-80X

Roland CUBE-80X User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info