527785

Roland CUBE 40GX Manual

11
Zoom out
Zoom in
Previous page
1/120
Next page
NederlandsPortuguêsEspañolItalianoFrançaisDeutschEnglish
Panel Descriptions
9
GA-FC jack
CUBE-40GX/80GX
only
You can connect the separately sold Roland GA-FC to switch
channels and turn eects on/o.
Connecting the GA foot controller (GA-FC; sold separately)
Connect a stereo cable to the FOOT SW GA-FC jack of the
CUBE-40GX/CUBE-80GX.
* Always use a stereo cable.
* Use cables that do not contain resistors.
GA-FC
Using the GA-FC
You can use the GA-FC to switch between JC CLEAN, LEAD, and
SOLO (MEMORY). You can also switch EFX, DELAY, and REVERB on/
o.
Ax the included adhesive labels to the GA-FC.
Switch Explanation
JC CLEAN Selects the JC CLEAN channel.
LEAD Selects the LEAD channel.
SOLO Selects the SOLO channel.
EFX Turns EFX on/o.
DELAY Turns DELAY on/o.
REVERB Turns REVERB on/o.
* Once you’ve turned o EFX, DELAY, or REVERB from the GA-FC, you
must rst turn the corresponding knob to the OFF position in order
for the [EFX], [DELAY], or [REVERB] knobs of the amp itself to be
re-enabled.
Using the expression pedals
By connecting expression pedals (Roland EV-5, BOSS FV-500L, BOSS
FV-500H; sold separately), you can change the input volume and
master volume by pedal.
GA-FC
Expression pedals
Jack Explanation
INPUT VOL
Adjusts the input volume.
* The input volume that is controlled by the expression
pedal connected to this jack cannot be adjusted from
the panel.
MASTER VOL
Adjusts the master volume. This lets you use volume
changes as a performance technique, or to mute your
instrument.
* The master volume that is controlled by the expres-
sion pedal connected to this jack is dierent than that
of the [MASTER] knob on the panel.
Setting MINIMUM VOLUME of an expression pedal
With the [MINIMUM VOLUME]
knob of an expression pedal,
you can set the value for when
the pedal is lifted up all the way
(lowest value).
* Use only the specied expression pedal (Roland EV-5, BOSS FV-500L,
BOSS FV-500H; sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
Memory/FC priority mode
(EFX, DELAY, REVERB on/o)
You can specify how EFX, DELAY, and REVERB will operate when you
switch the channel.
* The changed setting will be remembered even if you turn o the
power.
Memory priority mode (factory setting)
When you select SOLO, the stored on/o settings will take priority.
To make this setting
Turn on the power while holding down the CUBE’s [JC CLEAN]
button.
* Hold down the button until all LEDs blink.
FC priority mode
The on/o statuses of the GA-FC will always take priority when you
switch channels.
To make this setting
Turn on the power while holding down the CUBE’s [LEAD]
button.
* Hold down the button until all LEDs blink.
[MINIMUM
VOLUME]
knob
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CUBE 40GX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CUBE 40GX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 41,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info