Manual Roland CUBE 40GX (page 8 of 120) (English, German, Dutch, French, Italian, Portuguese, Spanish)

527785

Zoom out

Zoom in

1/120

Panel Descriptions

7 EQUALIZER

[BASS] knob

This adjusts the sound level of the low-frequency range.

[MIDDLE] knob

This adjusts the sound level of the middle-frequency range.

[TREBLE] knob

This adjusts the sound level of the high-frequency range.

CUBE-40GX/80GX

only

* When the LEAD channel Type switch is set to BLACK PANEL, DLX

COMBO, or TWEED, setting [BASS] knob, [MIDDLE] knob and

[TREBLE] knob all to 0 (zero) stops all sound.

8 PRESENCE

[PRESENCE] knob

CUBE-80GX

only

This gives the midrange and high end a more lustrous contour. This

is eective when you want to make the sound more airy and open.

9 EFX

[EFX] knob

Turn this knob to select the eect. Turn

the knob to adjust the amount of eect

applied.

The indicator lights up when this is on,

and goes out when it’s o.

* Graduations for each eect on a panel

are for reference. Be sure to check the

sound as you adjust the eects.

Knob Position Explanation

CHORUS

This adds a slightly detuned sound to the original

sound, giving the sound greater breadth and fullness.

FLANGER

This creates a anging eect that creates a sort of

spinning sensation with the sound.

PHASER

This adds a phase-shifted signal to the original sound,

giving the sound aswirling sensation.

TREMOLO

This eect produces cyclical changes in the volume

level.

HEAVY OCTAVE

This adds sound lowered by an octave to the original

sound. Since you can play chords even when using this

eect, you can use it to fatten the sound of your chordal

playing as well.

CUBE-40GX/80GX

only

You can also switch this on and o using a GA foot controller (GA-

FC; sold separately).

10 DELAY

[DELAY] knob

You can switch between use of two types of

delay by changing the position of the knob.

The position of the knob within this range

adjusts the volume of the delay sound.

The indicator lights up when delay is on

and goes out when the eect is o.

* Graduations for each eect on a panel are

for reference. Be sure to check the sound as

you adjust the eects.

Knob Position Explanation

WARM

A delay with the sound of a warm, analog delay.

Turning the knob toward the right will increase the

eect sound.

CLEAR

A clear delay with minimal degradation in the sound.

Turning the knob toward the right will increase the

eect sound.

CUBE-20GX

only

The delay time will change according to the position of the knob.

CUBE-40GX/80GX

only

You can also switch delay on and o using a GA foot controller (GA-

FC; sold separately) .

[TAP] button

CUBE-40GX/80GX

only

Use this to set the delay time. When you press the button twice, the

delay time will be set to the time interval at which you pressed the

button. The maximum length is 2000 ms.

11 REVERB

[REVERB] knob

You can switch between use of two types of

reverb by changing the position of the knob.

You can adjust the intensity of the eect by

varying the knob position.

The indicator lights up when reverb is on and

goes out when the eect is o.

* Graduations for each eect on a panel are for

reference. Be sure to check the sound as you

adjust the eects.

Knob Position Explanation

SPRING

This is modeled on spring reverb.

It produces the distinctive reverberations of a spring.

Turning the knob clockwise makes the eect progres-

sively more intense.

PLATE

This is a plate reverb.

This reverb features high-end sustain. Turning the knob

clockwise makes the eect progressively more intense.

CUBE-40GX/80GX

only

You can also switch reverb on and o using a GA foot controller

(GA-FC; sold separately).

12 POWER

[POWER] switch

This switches the power on and o.

13 MASTER

[MASTER] knob

Adjusts the overall volume.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland CUBE 40GX in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 41,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland CUBE 40GX Manual

Product: