Manual Roland CUBE 15XL (page 5 of 48) (English, German, Dutch, French, Italian, Portuguese, Spanish)

527781

Zoom out

Zoom in

1/48

Português Italiano DeutschNederlands Español Français

English

Power Supply

• Do not connect this unit to same electrical outlet that is being used

by an electrical appliance that is controlled by an inverter (such as a

refrigerator, washing machine, microwave oven, or air conditioner),

or that contains a motor. Depending on the way in which the

electrical appliance is used, power supply noise may cause this unit to

malfunction or may produce audible noise. If it is not practical to use a

separate electrical outlet, connect a power supply noise lter between

this unit and the electrical outlet.

• Before connecting this unit to other devices, turn o the power to all

units. This will help prevent malfunctions and/or damage to speakers

or other devices.

• Although the LEDs are switched o when the POWER switch is

switched o, this does not mean that the unit has been completely

disconnected from the source of power. If you need to turn o the

power completely, rst turn o the POWER switch, then unplug the

power cord from the power outlet. For this reason, the outlet into

which you choose to connect the power cord’s plug should be one

that is within easy reach and readily accessible.

Placement

• Using the unit near power ampliers (or other equipment containing

large power transformers) may induce hum. To alleviate the problem,

change the orientation of this unit; or move it farther away from the

source of interference.

• Noise may be produced if wireless communications devices, such as

cell phones, are operated in the vicinity of this unit. Such noise could

occur when receiving or initiating a call, or while conversing. Should

you experience such problems, you should relocate such wireless

devices so they are at a greater distance from this unit, or switch them

o.

• Do not expose the unit to direct sunlight, place it near devices that

radiate heat, leave it inside an enclosed vehicle, or otherwise subject

it to temperature extremes. Also, do not allow lighting devices that

normally are used while their light source is very close to the unit (such

as a piano light), or powerful spotlights to shine upon the same area

of the unit for extended periods of time. Excessive heat can deform or

discolor the unit.

• When moved from one location to another where the temperature

and/or humidity is very dierent, water droplets (condensation) may

form inside the unit. Damage or malfunction may result if you attempt

to use the unit in this condition. Therefore, before using the unit, you

must allow it to stand for several hours, until the condensation has

completely evaporated.

• Do not allow rubber, vinyl, or similar materials to remain on this

unit for long periods of time. Such objects can discolor or otherwise

harmfully aect the nish.

• Do not paste stickers, decals, or the like to this instrument. Peeling

such matter o the instrument may damage the exterior nish.

• Depending on the material and temperature of the surface on which

you place the unit, its rubber feet may discolor or mar the surface.

You can place a piece of felt or cloth under the rubber feet to prevent

this from happening. If you do so, please make sure that the unit will

not slip or move accidentally.

• Do not put anything that contains water (e.g., ower vases) on this

unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish,

spray cans, etc., near the unit. Swiftly wipe away any liquid that spills

on the unit using a dry, soft cloth.

Maintenance

• For everyday cleaning wipe the unit with a soft, dry cloth or one that

has been slightly dampened with water. To remove stubborn dirt, use a

cloth impregnated with a mild, non-abrasive detergent. Afterwards, be

sure to wipe the unit thoroughly with a soft, dry cloth.

• Never use benzine, thinners, alcohol or solvents of any kind, to avoid

the possibility of discoloration and/or deformation.

Additional Precautions

• Use a reasonable amount of care when using the unit’s buttons, sliders,

or other controls; and when using its jacks and connectors. Rough

handling can lead to malfunctions.

• When connecting / disconnecting all cables, grasp the connector

itself—never pull on the cable. This way you will avoid causing shorts,

or damage to the cable’s internal elements.

• A small amount of heat will radiate from the unit during normal

operation.

• To avoid disturbing your neighbors, try to keep the unit’s volume at

reasonable levels. You may prefer to use headphones, so you do not

need to be concerned about those around you.

• When you need to transport the unit, package it in the box (including

padding) that it came in, if possible. Otherwise, you will need to use

equivalent packaging materials.

• Some connection cables contain resistors. Do not use cables that

incorporate resistors for connecting to this unit. The use of such cables

can cause the sound level to be extremely low, or impossible to hear.

For information on cable specications, contact the manufacturer of

the cable.

• Wrap the power cord around the cord hook when transporting or

storing the unit.

IMPORTANT NOTES

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland CUBE 15XL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 33,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland CUBE 15XL Manual

Product: