527435
15
Zoom out
Zoom in
Previous page
1/42
Next page
13
Português Italiano DeutschNederlands Español Français
English
You can save and call up the panel settings (those enclosed by the line
in the gure) for sounds you create. On this unit, this function is called
“SOLO. This is a convenient way to switch between a backing sound
and a solo sound.
With the factory settings, the sample setting “HEAVY BOTTOM” (p. 16) is
saved.
CUBE-60XL BASS
CUBE-120XL BASS
Saving the Panel Settings
1. Set the SOLO [VOLUME] knob to 0.
NOTE
If the SOLO volume is set high, the
sound may be unexpectedly loud
when the panel settings are saved.
Before saving, lower the volume to 0.
2. Create a sound.
3. Press and hold the SOLO [ON/OFF] switch on the panel for
several seconds.
The indicator will blink. When the panel settings
have been saved, the indicator will change from
blinking to lit.
* Never switch o the power while the indicator
is blinking.
4. Use the SOLO [VOLUME] knob to adjust
the volume.
* Saved panel settings remain in memory even after the power is
turned o.
Recalling the Saved Sound
1. With SOLO o, press the SOLO [ON/OFF] switch.
The SOLO indicator will light, and the saved panel settings will be
recalled.
* If you’re using the CUBE for the rst time, the factory settings will be
recalled.
Editing the saved settings
1. Press the SOLO [ON/OFF] switch to call up the saved settings.
2. Turn the panel knob for the item you want to change, and
modify the setting.
The SOLO indicator goes out briey when the position of the knob
coincides with the position stored in memory.
3. Hold down the SOLO [ON/OFF] switch for several seconds.
The indicator will blink. When the panel settings have been saved, the
indicator will change from blinking to lit.
* Never switch o the power while the indicator is blinking.
* Once the new settings have been saved, the previous settings in
eect before the changes cannot be called up again.
* To quit without saving the changes, press the SOLO [ON/OFF]
switch.
Note the following if you’ve set FOOT SW
TYPE to FS-5L (LATCH)
If a foot switch is connected to the SOLO/COMP/DRIVE jack, the
SOLO [ON/OFF] switch will be inoperable.
If SOLO is on, and a foot switch is connected to the SOLO/COMP/
DRIVE, EFX/REVERB or DELAY/REC/PLAY/DUB/TAP/STOP jack, the
foot switchs indicator may not match the on/o status of the CUBE’s
COMP/DRIVE, EFX, REVERB, or DELAY. If you want the on/o status
of the CUBEs COMP/DRIVE, EFX, REVERB, or DELAY to consistently
conform to the foot switchs indicator, change the setting for the
CUBE-60XL BASS/CUBE-120XL BASS to “Foot Switch Priority Mode.
For details, see ”Using a Latch-type Foot Switch (p. 11).
In order to be able to save the panel settings, you rst need to
switch on SOLO using the foot switch.
Returning to the Factory-default Settings
Hold down the [TAP/STOP] switch and the SOLO [ON/OFF]
switch at the same time and switch on the power. The SOLO
indicator blinks and the settings saved with the SOLO function
are returned to their factory defaults.
Using the SOLO Function
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CUBE 120XL BASS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CUBE 120XL BASS in the language / languages: English, German as an attachment in your email.

The manual is 60,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CUBE 120XL BASS

Roland CUBE 120XL BASS Quick start guide - German - 2 pages

Roland CUBE 120XL BASS User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info