Manual Roland CUBE 120XL BASS (page 9 of 42) (English, German)

527435

Zoom out

Zoom in

1/42

Português Italiano DeutschNederlands Español Français

English

To use the LOOPER function

17. [DELAY/LOOPER] Knob

Set the knob in the LOOPER range to turn on the LOOPER function. The

position of the knob within this range species the LOOPER function’s

playback volume.

18. [REC/PLAY/DUB] Switch

Use this switch to record, play back, and overdub.

19. [TAP/STOP] Switch

This switch stops playback or erases the recording.

If the [DELAY/LOOPER] knob is in the LOOPER range, this switch stops

the LOOPER or erases the recording.

* For details on using the LOOPER function, refer to ”Using the

LOOPER” (p. 14).

* When the knob is positioned at LOOPER, no delay eect is applied.

To use the LOOPER and DELAY simultaneously, refer to ”Using the

LOOPER Function and DELAY at the Same Time” (p. 15).

REVERB

20. [REVERB] Knob

You can switch between use of two types of reverb by

changing the position of the knob. You can adjust the

intensity of the eect by varying the knob position.

The indicator lights up when REVERB is on and goes

out when the eect is o.

You can also switch REVERB on and o using an

optional footswitch pedal.

Knob Position Description

ROOM

This reverb simulates the short reverberant sound

heard within a room. Turning the knob clockwise

makes the eect progressively more intense.

PLATE

This is a plate reverb.

This reverb features high-end sustain. Turning the knob

clockwise makes the eect progressively more intense.

POWER SQUEEZER

(CUBE-60XL BASS only)

21. [POWER SQUEEZER] Switch

The switch lights in red when the POWER SQUEEZER

function is on and goes out when the POWER SQUEEZER

is o.

Switching on the POWER SQUEEZER function allows you

to reduce the amp’s output to volume levels that are

suitable for the average home.

Switching this on allows you to produce a sound that preserves the

same tone and balance at volume levels that are suitable for the

average home.

* The POWER SQUEEZER function aects only sounds input through

the BASS INPUT jack. It has no eect on sounds input via the AUX IN

jack.

* The POWER SQUEEZER function will also aect the output from the

LINE OUT and RECORDING OUT/PHONES jacks; this is normal and

does not indicate a malfunction.

POWER

22. [POWER] Switch

This switches the power on and o.

Switching the Power On and O

* Turn on power to your various devices in the order specied. By

turning on devices in the wrong order, you risk causing malfunction

and/or damage to speakers and other devices.

1. Make sure that all [VOLUME] knobs on the CUBE-60XL BASS/

CUBE-120XL BASS and all the connected devices are set to 0.

2. Turn on all the devices connected to the CUBE-60XL BASS/

CUBE-120XL BASS’s input jacks (BASS INPUT jack and AUX IN

jack).

3. Turn on the CUBE-60XL BASS/CUBE-120XL BASS.

* Always make sure to have the volume level turned down before

switching on power. Even with the volume all the way down, you

may still hear some sound when the power is switched on, but this is

normal, and does not indicate a malfunction.

* This unit is equipped with a protection circuit. A brief interval (a

few seconds) after power up is required before the unit will operate

normally.

4. Adjust the volume levels for the devices.

5. Before switching o the power, lower the volume on all the

connected devices and then TURN OFF the devices in the

reverse order to which they were switched on.

* If you need to turn o the power completely, rst turn o the

POWER switch, then unplug the power cord from the power outlet.

Refer to Power Supply (p. 3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland CUBE 120XL BASS in the language / languages: English, German as an attachment in your email.

The manual is 60,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CUBE 120XL BASS

Roland CUBE 120XL BASS Quick start guide - German - 2 pages

Roland CUBE 120XL BASS User Manual - Dutch - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland CUBE 120XL BASS Manual

Product: