This changes the phase of the sound that is output from the
main unit (subwoofer) (p. 4).
EQUALIZER knobs
[LOW] knob
Adjusts the volume of
the lower range.
[HIGH] knob
Adjusts the volume of
the upper range.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn o all devices before making any
connections.
* Once the connections have been completed, turn on your various devices in the order specied. By turning on devices in the wrong order, you risk
causing malfunction and/or damage to speakers and other devices.
1. Set the [MASTER] knob
to 0.
NOTE
This system will be turned o automatically when
approximately 4 hours have passed without any input signal
being detected.
If you don’t want the system to be turned o automatically,
set the [AUTO OFF] switch to the “OFF” position.
3. Turn the system on.2. Turn on the connected
equipment.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after turning on is required before the unit will operate normally.
* Before turning on/o the unit, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when
turning on/o the unit. However, this is normal and does not indicate a malfunction.
* If you need to turn o the power completely, unplug the power cord from the power outlet. Refer to “Power Supply” (p. 3).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roland CM-220 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roland CM-220 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 26,37 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
