527761
213
Zoom out
Zoom in
Previous page
1/225
Next page
213
MIDI Implementation
MIDI Implementation
REWIND (MCS)
Status Data Bytes Status
F0H 7FH, Dev, 06H, 05H F7H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
05H REWIND (MCS)
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
goes into the rewind condition.
RECORD STROBE
Status Data Bytes Status
F0H 7FH, Dev, 06H, 06H F7H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
06H RECORD STROBE
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
goes into the following condition.
1. The CDX-1 is in the playback condition.
Start Recording the tracks that status are the record standby mode.
2. The CDX-1 is in the stop condition.
Start Playing back, and Start Recording the track that status are record standby mode.
RECORD EXIT
Status Data Bytes Status
F0H 7FH, Dev, 06H, 07H F7H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
07H RECORD EXIT
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
exits from the record condition.
LOCATE (MCP)
Format 2-LOCATE [TARGET]
Status Data Bytes Status
F0H 7FH, Dev, 06H, 44H, 06H, 01H, hrH, mnH, scH, frH, ffH F7H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
44H LOCATE (MCP)
06H Number of Bytes
01H TARGET sub command
hrH, mnH, scH, frH, ffH Standard Time with Sub Frame
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the CDX-1
locates the specified time location received from the command.
3. TRANSMITTED DATA
Channel Voice Message
Note On/Off
Transmit the number/velocity which is designated, in the MIDI channel number 1 16
which is designated with Rhythm Ch. in the UTILITY MIDI.
The MIDI Channel number specified in Pads Tx Ch. in the UTILITY MIDI and the Note
number specified in RxNote(Pad1) are output.
In this case, Velocity is fixed at 100.
Status Second Third
9nH mmH llH
n = MIDI Channel No.: 00H0FH (ch.1ch.16)
mm = Note No.: 00H7FH (0127)
ll = Velocity: 01H7FH (1127) / 00H = NOTE OFF
Program Change
Works as bank switch, in the MIDI channel number which is designated with Pads Rx Ch.
in the UTILITY MIDI.
Status Second
CnH ppH
n = MIDI Channel No.: 00H0FH (ch.1ch.16)
pp = Program No.: 00H3FH (063)
System Common Messages
MIDI Time Code Quarter Frame Messages
MIDI Time Code Quarter Frame Messages can be transmitted while the CDX-1 is running
(Playing or Recording) if the SONG parameter Sync Out is MTC.
Status Second
F1H mmH (= 0nnndddd)
nnn = Message type: 0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
dddd = 4 bit nibble data: 0HFH (015)
If the upper and lower 4 bits of the count are combined, these bit fields are assigned as
follows.
Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No. (029)
Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds Count (059)
Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes Count (059)
Hours Count xyyzzzzz
x Reserved (0)
yy Time Code type
0 = 24 Frames/Sec
1 = 25 Frames/Sec
2 = 30 Frames/Sec (Drop Frame)
3 = 30 Frames/Sec (Non Drop Frame
zzzzz Hours Count (023)
213


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CDX-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CDX-1 in the language / languages: German as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CDX-1

Roland CDX-1 User Manual - English - 252 pages

Roland CDX-1 User Manual - Dutch - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info