527439
83
Zoom out
Zoom in
Previous page
1/96
Next page
83
Reference
Problems with the Sound (continued)
Problem Cause and Action
See
Page
The input source (audio
source) is not output
Could devices be connected to both the MIC 1 jack and GUITAR jack?
If you connect devices to both the MIC 1 jack and the GUITAR jack, the sound
from the MIC 1 jack will not be input. If you want to input sound from the MIC 1
jack, remove the plug from the GUITAR jack.
21
Could the setting of the [MIC SELECT] button be incorrect?
Use the setting that’s appropriate for the input source.
37
Could the line input be turned off?
Turn the LINE IN “On.”
78
Insufficient volume from a
device connected to the
MIC 1/MIC 2/GUITAR/LINE
IN jacks
Could you be using a connection cable that contains an internal resistor?
Use a connection cable that does not contain an internal resistor (such as one from
the Roland PCS-series).
The sound recorded via
the internal mics is not
loud enough
Did you adjust the input level of the internal mics?
Use Int MIC Gain to raise the input level of the internal mics.
37
The recorded sound is
noisy or distorted
Is the input level adjusted appropriately?
Adjust the input level so that the level meter briefly reaches “-3 dB” when loud
sounds are input.
37,
38
Could you have raised the input level for sources that are not connected?
Even if no equipment is connected, we recommend that you set the input level to
the minimum (MIN) for all inputs that you are not recording.
Could the [MIC SELECT] button be lit orange?
Even if you are intending to record via external mics, a noisy recording may
indicate that you are actually recording from the internal mics. Set the [MIC
SELECT] button to the correct position for the audio source you intend to record.
37
When recording the sound from an instrument connected to the LINE IN jacks,
could you be unintentionally recording the sound from another CD-2 source as
well?
When recording only the sound from the LINE IN jacks, make sure that [MIC
SELECT] is off (unlit).
37
Could you be applying a mastering effect while creating a music CD?
Some mastering effect patches may cause noise or distortion when used with
certain types of material. Try changing to a different mastering effect patch.
49
Is the output level set correctly?
If you raise the output level too high, noise or distortion may occur in the sound
from the internal speakers. Use the [OUTPUT LEVEL] knob to adjust the volume.
25
An unwanted effect is
applied to the sound
Could you have selected an effect?
Turn the effect “Off.”
70
Could a mastering effect be selected?
Turn the mastering effect “Off.”
49
Sound is briefly heard
from the internal speakers
even though they are
muted
Were you connecting or disconnecting headphones?
If the speakers are muted (the [SPEAKER MUTE] button is lit), noise may be heard
from the internal speakers when you connect or disconnect the headphones; this
is not a malfunction.
Troubleshooting
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland CD-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland CD-2 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland CD-2

Roland CD-2 User Manual - German - 97 pages

Roland CD-2 User Manual - Dutch - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info