710226
11
Zoom out
Zoom in
Previous page
1/16
Next page
11
Troubleshooting
If the BT-1 does not operate as you expect, please check the following points rst.
If you are still unable to resolve the problem, contact your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as listed on the “Information” page.
Problem Check / Action
No sound
Check the connections. (p. 7)
Firmly insert the plug of the connection cable all the way into the jack.
Use a stereo cable. (p. 7)
Adjust the volume to an appropriate level.
Check the instrument that’s assigned to the head (or rim) trigger.
Check the drum sound module’s trigger indicator to conrm that the drum
sound module is receiving the trigger signals.
On some drum sound modules, the instrument might not sound if you’ve
assigned a control function to the pad.
For details, refer to the owner’s manual of your drum sound module.
The sound of another pad is also
heard when you strike the BT-1
When the BT-1 is attached to the hoop of a V-Drums pad, striking the BT-1
will cause that pad to sound. If this presents a problem, it can be mounted
on an optional stand.
Adjust the crosstalk cancel setting of your drum sound module.
Reattach the BT-1 at a dierent location.
Two or more notes are sounded
when you strike once
Fasten the BT-1 rmly to the hoop or stand.
Fasten the attachment rmly.
Increase the retrigger cancel setting on your drum sound module. If this has
no eect, increase the mask time setting.
The rim sound is heard instead of
the head sound
When the BT-1 is connected to some drum sound modules, the head sound
will not be triggered. The BT-1 will operate only as a rim trigger. This is not a
malfunction.
The BT-1 is triggered when you
strike a dierent pad or drum
Use a stereo cable. (p. 7)
If you’re using a drum sound module with which the BT-1 operates as a rim
trigger, do not assign an instrument or control function to the head of the
trigger input the BT-1 is connected to. (p. 8)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland C-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland C-80 in the language / languages: English as an attachment in your email.

The manual is 4,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info