527430
70
Zoom out
Zoom in
Previous page
1/96
Next page
70
Other Settings
Settings for transmitted messages
Here’s how to specify the MIDI messages that will be transmitted
when a [USER/MIDI] coupler is on.
1.
From the main screen, press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select “5 USER/MIDI
Coupler.”
fig.LCD006.eps
3.
Press the [Select/Menu] knob to access the “USER/MIDI”
screen.
4.
Turn the [Select/Menu] knob to move the cursor to the
top position, and then turn the [Value/Exit Menu] knob
to select the tablet that you want to change the settings.
fig.LCD093.eps
5.
Turn the [Select/Menu] knob to select item, and then turn
the [Value/Exit Menu] knob to change the settings.
fig.LCD074.eps
6.
Press the [Value/Exit Menu] knob twice to return to the
main screen.
Indication
Tablet name
MAN-I A MAN I (lower) [USER MIDI A]
MAN-I B MAN I (lower) [USER MIDI B]
MAN-II A MAN II (upper) [USER MIDI A]
MAN-II B MAN II (upper) [USER MIDI B]
PEDAL A PEDAL (pedalboard) [USER MIDI A]
PEDAL B PEDAL (pedalboard) [USER MIDI B]
Indication
Explanation Range
Name
Select by sound name Name of sound
PC Number Program change number OFF, 1–128
Bank MSB Bank select MSB OFF, 0–127
Bank LSB Bank select LSB OFF, 0–127
Volume Specifies the volume OFF, 0–127
Octave Specifies the octave (pitch) -2–+2
Reverb Specifies the depth of reverb OFF, 1–127
Chorus
Specifies the depth of chorus OFF, 1–127
Velocity
Velocity value
KBD:
The keyboard’s velocity will be used
EXP:
The expression pedal’s position will be used
2–127:
The specified value will be used as the velocity
Expression Expression Pedal OFF, ON
Indication
Explanation Range
Selecting sounds on your external MIDI device
How sound names are displayed
If an MX-200 or a GM2 compatible sound module is connected,
you can set “Tone Name” to the model of sound module you’re
using (p. 72), so that the “USER/MIDI” screen’s “Name” field will
show the names of the sounds, allowing you to choose sounds
by name.
Using the keyboard to select
Even when the “USER/MIDI” screen is not shown, you can use
the following method to select sounds on your external MIDI
device.
1. Turn on the desired [USER/MIDI] coupler.
2.
Hold down the [SET] piston and play a note on the
keyboard and the pedalboard.
The [USER/MIDI] coupler will blink.
The program change corresponding to the note you played
will be transmitted, and the sound selection on your MIDI
device will change.
Each note of the keyboards corresponds to the following
program changes.
Keyboard Tone name Program change
Lower keyboard C2–C7 1–61
Upper keyboard C2–C7 62–122
Pedalboard C2–F2 123–128
C-380_330_e.book 70 ページ 2010年4月28日 水曜日 午後10時11分
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland C-380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland C-380 in the language / languages: English as an attachment in your email.

The manual is 10,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland C-380

Roland C-380 User Manual - German - 96 pages

Roland C-380 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info