527431
82
Zoom out
Zoom in
Previous page
1/96
Next page
82
Troubleshooting
If the C–330/C-380 does not function in the way you except, first check the following chart. If this does not resolve the problem,
consult your dealer or a nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.
Power does not turn on
Problems with the screen display
No sound
Symptom
Cause Response Page
When you press the [POWER] switch, the
power doesn’t come on
Power cord is not connected correctly. Connect the power cord correctly. p. 22
Symptom
Cause Response Page
Nothing appears on screen
The C–330/C-380 uses a liquid-crystal screen, so text may not be
displayed when the ambient temperature is below freezing.
This is not a malfunction.
The display contrast setting has not been set correctly. Correctly set the display contrast. p. 27
Symptom
Cause Response Page
No sound
No sound (stop) is selected.
If you have simply turned on the power,
the keyboard will not produce sound
since no stop has been selected.
p. 29
The [Master Volume] knob is at the “Min” position (volume is at
minimum).
Turn the [Master Volume] knob toward
“Max.”
p. 24
Headphones are connected.
If headphones are connected, sound will be heard only from the
headphones.
If you want sound to be produced from
the speakers, disconnect the
headphones.
p. 25
A plug has remained in the headphone jack.
Remove the plug from the headphone
jack.
p. 25
The expression pedal is not depressed. Depress the expression pedal. p. 42
No sound from the satellite speakers
The [Select/Menu] knob (Satellite Volume) is set to “0.”
Adjust the [Select/Menu] knob (Satellite
Volume).
p. 34
The satellite speaker cable connector is not connected correctly.
Correctly connect the satellite speaker
cable connector.
p. 21
Pedalboard does not sound The pedalboard cable is not connected correctly. Correctly connect the pedalboard cable. p. 19
No sound
(when connected to external
equipment)
The power to the connected external equipment is not switched
on.
Switch on power to the connected
external equipment, in the correct
order.
p. 74
The “Aux In Volume” is set to “0” Adjust the “Aux In Volume” setting. p. 75
C-380_330_e.book 82 ページ 2010年4月28日 水曜日 午後10時11分
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland C-330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland C-330 in the language / languages: English as an attachment in your email.

The manual is 10,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland C-330

Roland C-330 User Manual - German - 96 pages

Roland C-330 User Manual - Dutch - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info