Manual Roland C-30 (page 21 of 32) (English)

527427

Zoom out

Zoom in

1/32

Additional Convenient Functionality <Advanced Operation>

The included pedal can be connected to the C-30’s PEDAL jack and used as the damper pedal of a piano.

If you press the pedal while performing, the decay will extend even after you take your fingers off the keyboard.

You can use the connected pedal to switch between two sets of sounds.

We’ll refer to a state in which one or more sounds are selected as a “sound set.” Here’s how you can switch between a “sound set

stored in memory” and “the currently selected sound set.”

Select the sounds that you want to store in memory.

Hold down the French [8’ I] button and [8’ II] button

simultaneously, so their indicators are lit.

While holding down the [Function] button, press the

[Pedal] button to make the [Pedal] button’s indicator

light.

The sound(s) you selected in step 1 will be stored in

memory.

Select the other sound to which you want to switch.

Press the [Organ I] button so its indicator is lit.

Press the pedal.

The French [8’ I]+[8’ II] sound will be selected while you

hold down the pedal, and you’ll return to the [Organ I]

sound when you release the pedal.

* If you’ve assigned the pedal to switch sounds, pressing the

[Function] button will make the [Pedal] button’s indicator

light.

* If you’re using the pedal to switch between sound sets, you

can't use it as a damper pedal.

◆

If you want to use the pedal as a damper pedal, hold

down the [Function] button once again and press the

[Pedal] button to turn off the [Pedal] button’s

illumination.

If you want to switch to a sound set that you’ve already

stored in the C-30, perform the following steps.

1) Select the sounds that you want to store in memory.

2) While holding down the [Function] button, press the

[Pedal] button to temporarily turn off the [Pedal]

button’s light.

3) Once again hold down the [Function] button and

press the [Pedal] button so the [Pedal] button’s light

is turned on again.

Using the pedal

Using the pedal to switch sounds

PEDAL jack

Pedal

Use the cable clamp located

on the bottom surface of the

C-30 to fasten the pedal cable.

Set the pedal select switch to

"Continuous."

Example

Store the French [8’ I] + [8’ II], and

switch to and from the [Organ I] sound

C-30_e.book 21 ページ２００８年３月１０日　月曜日　午前１０時３１分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland C-30 in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland C-30

Roland C-30 Quick start guide - English - 2 pages

Roland C-30 User Manual - German - 34 pages

Roland C-30 User Manual - Dutch - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland C-30 Manual

Product: