527408
117
Zoom out
Zoom in
Previous page
1/126
Next page
117
MIDI Implementation
Appendices
Universal System Exclusive Message
MIDI Time Code Commands
Full Message
Basic operation of quarter frame messages will be handled.
Status Data Bytes Status
F0H, 7FH Dev,01H, 01H, hrH, mnH, scH, frH F7H
Byte Description
F0H, 7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
01H sub-ID #1 (MIDI Time Code)
01H sub-ID #2 (MIDI Full Message)
hrH Hours and Type 0 yy zzzzz
yy type
00 = 24 Frames/sec
01 = 25 Frames/sec
10 = 30 Frames/sec (Drop Format)
11 = 30 Frames/sec (Non Drop Format)
zzzzz hours (00Ð23)
mnH Minutes (00Ð59)
mnH Seconds (00Ð59)
frH Frames (00Ð29)
F7H EOX (End of Exclusive Message)
When you change the song position, the device ID will be transmitted as 7FH.
MIDI Machine Control Commands
Status Data Bytes Status
F0H 7FH, Dev, 06H, aaH, ..., bbH F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
aaH Command
: :
bbH Command
F7H EOX (End of Exclusive Message)
* see Ô2. MIDI Machine ControlÕ section
2. MIDI Machine Control
MIDI Machine Control Command Reference
STOP (MCS)
Status Data Bytes Status
F0H 7FH, Dev, 06H, 01H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
01H STOP (MCS)
F7H EOX (End of Exclusive Message)
If the transport switch [STOP] was pressed, the BR-8 transmits as the device ID 7FH.
DEFERRED PLAY (MCS)
Status Data Bytes Status
F0H 7FH, Dev, 06H, 03H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
03H DEFERRED PLAY (MCS)
F7H EOX (End of Exclusive Message)
If the transport switch [PLAY] was pressed, the BR-8 transmits as the device ID 7FH.
RECORD STROBE
Status Data Bytes Status
F0H 7FH, Dev, 06H, 06H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
06H RECORD STROBE
F7H EOX (End of Exclusive Message)
If the transport switch [REC] was pressed out of the recording condition, the BR-8 transmits
as the device ID 7FH.
RECORD EXIT
Status Data Bytes Status
F0H 7FH, Dev, 06H, 07H F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
07H RECORD EXIT
F7H EOX (End of Exclusive Message)
If the transport switch [REC] was pressed while recording, the BR-8 transmits as the device
ID 7FH.
MMC RESET
Status Data Bytes Status
F0H 7FH, Dev, 06H, 0DH F7H
Byte Description
F0H Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (7FH)
06H MMC Command Message
0DH MMC RESET
F7H EOX (End of Exclusive Message)
When powered on the BR-8 transmits as the device ID 7FH.
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BR-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BR-8 in the language / languages: Dutch as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info