Manual Roland BK-9 (page 158 of 180) (English)

527392

158

Zoom out

Zoom in

1/180

Menu options

158

option to switch o their transmission in the rst place.

Parameter Setting

Tx SysEx O, On

Tx Data Change

This parameter allows you to specify how the original program

changes of the songs you play back are transmitted via MIDI. The

BK-9 may change sound addresses (usually CC00 and CC32 values)

so as to play back all songs with the best possible quality. If you

switch this parameter on, such real-time transformations are also

transmitted via MIDI. If you switch this parameter o, the original

sound addresses are transmitted to the receiving device. (But the

BK-9’s tone generator continues to “enhance” the songs you play

back.)

Parameter Setting

Tx Data Change O, On

Tx Octave

The “Tx Octave” parameter can be set to Absolute or Relative. You

may have noticed that if you assign a bass sound to the UPPER1

or UPPER2 part in SPLIT mode, the notes are transposed to allow

you to play meaningful bass lines using the UPPER1/UPPER2 part.

“Relative” means that this internal (and automatic) transposition is

translated into MIDI note numbers.

In “Absolute” mode, however, the MIDI note numbers sent to other

instruments will be the ones of the keys you actually press.

Parameter Setting

Tx Octave Relative, Absolute

Rx Velocity

Your BK-9 is equipped with a velocity-sensitive keyboard and a

tone generator capable of responding to velocity messages. This

parameter allows you to switch the reception (RX) of velocity

messages on or o. If you don’t need “On”, specify which velocity

value to use instead of the continuous ux. This value will be used

for all notes received via MIDI..

Parameter Setting

Rx Velocity On, 1~127

Rx SySex

Use this parameter to specify whether the BK-9 should receive

SysEx messages from other devices.

Parameter Setting

Rx SySex O, On

Rx Transpose

Use this parameter to specify whether or not the BK-9 should

transpose the MIDI note messages it receives.

Parameter Setting

Rx Transpose O, On

Rx Common Exp.

This parameter allows you to specify that Expression messages

received on the channel you select here (1~16) should aect all of

the BK-9’s parts (except for the song parts). Select “O” if

Expression messages should only aect the part that receives on

the MIDI channel used by the Expression messages.

Parameter Setting

Rx Common Exp. O, 1~16

Soft Thru

Select “On” if the BK-9 should transmit all MIDI messages it receives

(using its MIDI OUT socket).

Parameter Setting

Soft Thru O, On

Visual Control TxCh

This parameter allows you to set the MIDI transmit channel for the

Visual Control function. (The BK-9 does not receive Visual Control

messages.) By default, this channel is set to 16.

Parameter Setting

Visual Control TxCh 1~16

Save MIDI Set

This function allows you to save your changes to a “User” memory

for quick recall.

This function can be selected using the [WRITE] button while the

“MIDI” page is displayed.

Right Display

1. Edit the desired MIDI parameters (“Edit Rhythm Parts”,

“Edit Song Parts”, “Edit Tone Parts”, “Edit System”).

2. Press the [WRITE] button.

The display changes to:

Right Display

3. Rotate the dial to select the MIDI Set where you want to

save your settings (“User1”~ “User8”) and push the dial.

A conrmation message informs you that the MIDI Set has been

saved.

If you change the MIDI settings after loading a “User” set, the BK-9

New owner BK 9. How to add speaker and what kind , wats ?? totally ignorant. Submitted on 7-1-2023 at 03:00
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-9 in the language / languages: English as an attachment in your email.

The manual is 59,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-9

Roland BK-9 Additional guide - English - 12 pages

Roland BK-9 Additional guide - German - 9 pages

Roland BK-9 User Manual - German - 160 pages

Roland BK-9 User Manual - Dutch - 160 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland BK-9 Manual

Product: